On-road RC cars (2WD/4WD)

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Spr. Club MB-01

Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom.155 V6 TI Martini TT-02

Article number: 300058606 Product: 1:10 RC Alfa Rom.155 V6 TI Martini TT-02 Tamiya welcomes a further limited edition re-issue of the Alfa Romeo 155 V6 TI Martini (TT-02) - the latest production was in 2016. This R/C model assembly kit recreates the racy Martini sponsored Alfa Romeo 155 V6 TI, which featured a purpose-developed 450hp-plus 2.5-liter V6 engine mounted in the front, and paired with a 6-speed semi-automatic transmission. A hi-tech flavor was added by electronically controlled front, central and rear diffs, traction control and ABS. It remained in contention for the prestigious 1996 International Touring Car title until the final race. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque-Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Ford Focus RS Custom TT-02 paint

Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Charleston (M-05)

€145.00

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

On-road RC cars (2WD/4WD)

1:10 RC Ford Mustang GT4 (TT-02)

€150.00

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€165.00

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E

€160.00

Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Audi A4 quattro Touring TT01E

€150.00

Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit.    Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and    no.45 cars (they raced in different touring car series), with    masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy    handling, and great customizability. • A wide range of option parts is available to tune the TT-01    Type-E chassis.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

€155.00

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat Abarth 1000TCR MB-01 paint.

€170.00

Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford GT Mk.II 2020 (TT-02) PB

€160.00

Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Lancia 037 Rally (TA02-S)

€235.00

Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.

On-road RC cars (2WD/4WD)

1:10 RC Lancia Delta HF Integrale TT-02

€170.00

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB 190E debis Zakspeed TT-01E

€150.00

Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC McLaren Senna TT-02

€160.00

Article number: 300058711 Product: 1:10 RC McLaren Senna TT-02 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the McLaren Senna which has already been released as Item 24355 in the 1/24 Sports Car series!   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD

€165.00

Article number: 300047484 Product: 1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD Tamiya welcomes back the 1/10 R/C 1990 Mercedes-Benz C 11 which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R/C fans. Enjoy running this model with various kinds of chassis setup! WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mitsubishi Lancer Evo V (TT-02)

€150.00

Article number: 300058713 Product: 1:10 RC Mitsubishi Lancer Evo V (TT-02) Tamiya is proud to announce the release of the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC NSU TT Jager (M-05)

€135.00

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

On-road RC cars (2WD/4WD)

1:10 RC Opel Calibra V6 Cliff (TT-01E)

€150.00

Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) Tamiya welcomes the Opel Calibra V6 Cliff R/C model based upon the TT-01 Type-E chassis. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive, overall black body with the Cliff logo caught people’s eye, and this car showed off strength in the races. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€185.00

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 Carrera RSR (TT-02)

€165.00

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

€160.00

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Type-SRX Chassis Kit

€340.00

Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02D Drift Spec Chassis

€150.00

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Volkswagen Beetle (M-06)

€190.00

Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC VW Karmann Ghia (M-06)

€175.00

Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse (MB-01)

€165.00

Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC au TOM'S GR Supra (TT-02)

€165.00

Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€155.00

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Audi V8 1992 Touringcar (TT-02)

€160.00

Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC F104 PRO II w/Body

€255.00

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat 131 Abarth Olio Fiat MF-01X

€185.00

Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€155.00

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02

€135.00

Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02 Silver p.

€145.00

Article number: 300047493 Product: 1:10 RC MB CLK AMG 2002 TT-02 Silver p. Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Motul Autech Z 2023 TT-02

€160.00

Article number: 300058735 Product: 1:10 RC Motul Autech Z 2023 TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€180.00

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Rally MB-01

€155.00

Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Renault Alpine A110 Jaeger M-06

€165.00

Article number: 300058708 Product: 1:10 RC Renault Alpine A110 Jaeger M-06 Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version achieved a class victory in German circuit races. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Skyline GT-R (R32) (TT-02D)

€235.00

Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Subaru WRX STI 24hr Nrbg TT-02

€160.00

Article number: 300058645 Product: 1:10 RC Subaru WRX STI 24hr Nrbg TT-02 This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine.

On-road RC cars (2WD/4WD)

1:10 RC T/GR Yaris Rally1 Hybrid TT-02

€140.00

Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four ST205 TT-02

€160.00

Article number: 300058743 Product: 1:10 RC Toyo. Celica GT-Four ST205 TT-02 Tamiya welcomes another classic racing car – this time, the Toyota Celica GT-FOUR (ST205) – paired with our popular TT-02 chassis. Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2-liter 4-cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 paint

€155.00

Article number: 300047500 Product: 1:10 RC Toyo. Celica GT-Four TT-02 paint Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 ST185

€150.00

Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Celica GT-Four TT-02

€150.00

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 2WD

€155.00

Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 paint

€185.00

Article number: 300047505 Product: 1:10 RC Toyota Supra (JZA80) BT-01 paint The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra Drift Spec TT-02D

€195.00

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TRF421 Chassis Kit

€755.00

Article number: 300042384 Product: 1:10 RC TRF421 Chassis Kit The TRF series welcomes the brand new TRF421 chassis kit. This R/C model assembly kit creates a 2 beltdriven 4WD, carbon fiber double-deck chassis. New features - such as updated drivetrain, lower deck featuring new shape, updated (one-piece or two-piece) upper deck, front and rear A-shaped upper suspension arms, adjustable front and rear caster angles, and shorter dampers - will surely provide superior performance. TRF421 Racing Chassis kit, 4WD, Carbon and Aluminium parts, A-Shape Arms, 2 Upper decks,incl. Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Chassis First Try On-Road

€110.00

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02BR Chassis Kit Buggy

€340.00

Article number: 300058710 Product: 1:10 RC TT-02BR Chassis Kit Buggy Tamiya is delighted to announce the release of the TT-02BR chassis in the TT-02B series which is popular among off-road racers. The TT-02BR chassis is an upgraded version of the TT-02B chassis kit with a wealth of parts, plus new aluminum propller joints and carbon fiber damper stays to ensure range of setup adjustments. Included Hop-up Option Parts Aluminum propeller joints *New! / Carbon fiber damper stays *New! Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 54501: TT-02 Aluminum Propeller Shaft Item 54768: 06 Module Hard Coated Aluminum Pinion Gear (17T) Item 54993: TT-02B/DF-03 Aluminum Damper Set Item 53793: DF-02 Two-Way Aluminum Rear Uprights Item 54539: TT-02B Full Turnbuckle Set Item 53791: DF-02 Assembly Universal Shaft Item 53880: Large Dish Wheels (4WD/Front, 62/25) Item 53881: Large Dish Wheels (Rear, 62/35) Item 54211: TRF201 Rear Wing Set Item 54815: TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.) Item 54926: TT-02 Lower Deck (Hard/Black) Included: 4WD assembly Kit, TT-02B Chassis, full ball bearings, 540er Torque-Tuned Motor, including Option Parts, Polycarbonat-body, Shaft driven, doubble wishbone suspension, Spike-tires, tube frame chassis, userguide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC VW Type 2 (T1) (M-06)

€185.00

Article number: 300058668 Product: 1:10 RC VW Type 2 (T1) (M-06) This new R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic drive just like the real RR Type 2 T1. About the Model • This is a 1/10 scale R/C model assembly kit. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Stylish metal-plated dish type wheels make for a great look. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.

On-road RC cars (2WD/4WD)

1:10 RC XV-01 Lancia Delta HF Integrale

€285.00

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 RC Buggyra Fat Fox (TT-01E)

€175.00

Article number: 300058661 Product: 1:14 RC Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.

On-road RC cars (2WD/4WD)

1:14 RC M-B Race Truck Actros MP4 TT-01E

€175.00

Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:14 RC Reinert Racing MAN TGS TT-01E

€180.00

Article number: 300058642 Product: 1:14 RC Reinert Racing MAN TGS TT-01E Following on from the success of the groundbreaking Team Hahn Racing MAN TGS model (Item 58632) last year, Tamiya announces the release of a new racing truck product on the TT-01 Type-E chassis. It recreates the #77 truck run by Team Reinert Racing in the 2016 running of the FIA European Truck Racing Championship. About the Model • This is a 1/14 scale R/C model assembly kit. • The form of the MAN TGS racing variant is captured accurately by a 4-piece durable and lightweight polycarbonate body. It includes depictions of details such as engine, turbocharger and frame. • Separately molded parts recreate side mirror, coupler and rear bumper. • Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck for the 2016 season. • Wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts to make the model compatible with LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

2003 Focus RS Custom (TT-02)

€150.00

Article number: 300058724 Product: 2003 Focus RS Custom (TT-02) Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 Citroen DS Blue PB MB-01

available from December

Article number: 300047502 Product: 1:10 RC Citroen DS MB-01 Blau Lack. Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better known cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Club Pai. MB-01

soon available again

Article number: 300047501 Product: 1:10 RC Alfa Rom. Giulia Club lack.MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.