Off-road rc cars

Off-road RC cars

1:10 RC AQROSHOT (DT-03T)

€135.00

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Super Clod Buster Black Edition

€345.00

Article number: 300047432 Product: 1:10 RC Super Clod Buster Black Edition • This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The stylish monster truck body is injection molded in black plastic, with great detail and realism. Metalplated parts are included to depict front grille, supercharger air intakes and roll bars. • Plastic bumper and damper components are red, giving a colorful accent. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that realize ground clearance of 55mm and a superb off-road drive. • Four-wheel steering ensures that the model has excellent handling. • Two Type 540 motors and the dedicated twin motor TEU106BK ESC give ample power via front and rear differential gears. • Stickers are a brand new design for this model. 4WD Monstertruck, assembly Kit, 2 motors, 4-Wheel steering, ABS Body (black), incl. ESC, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Wild Willy 2000 (WR-02)

€200.00

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Scope of delivery: Kit including electronic speed controller as well as detailed and illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Ford Bronco 2021 (CC-02)

€295.00

Article number: 300058705 Product: 1:10 RC Ford Bronco 2021 (CC-02) Tamiya is proud to announce the release of the Ford Bronco 2021 as our new R/C model on the cross country CC-02 chassis. The Ford Bronco has been sold since 1966, and the Ford Bronco 2021 was announced as the sixth generation model in 2021, 25 years since the last generation’s release. This car employs 2.3-liter inline-4 engine (standard) or 2.7-liter V6 engine (option). The model depicts the 2-door type’s top grade First Edition model. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Ford Escort MkII Rally PB MF-01X

€200.00

Article number: 300058687 Product: 1:10 RC Ford Escort MkII Rally PB MF-01X Rally cars are always an exciting subject, accomplished both on asphalt and flat dirt, and Tamiya is delighted to announce the addition of another to our R/C stable: the Ford Escort Mk.II Rally, depicting a car which was RAC Rally champion from 1975-1979. Fittingly, it is based upon the MF-01X chassis, which has dedicated rally parts and is at home on a range of surfaces. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

Off-road RC cars

1:10 RC MB Unimog 406 U900 (CC-02)

€295.00

Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Squash Van 4WD GF-02

€200.00

Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

€540.00

Article number: 300058397 Product: 1/10 RC Toyota HiLuxHighLift 4x4 3-Speed Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Buggy Sand Scorcher 2010 2WD

€395.00

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Egress (2013) Lim. Edit. 1989

€430.00

Article number: 300058583 Product: 1:10 RC Egress (2013) LWA 1989 Tamiya is pleased to welcome a modernized version of the Egress into its 2013 line-up. The Egress first appeared in 1989, a 4WD racing buggy based on the Avante and featuring stacks of specialist racing parts. Now, the Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with the competition. Buy this model and you’ll be tearing up off-road circuits in no time! About the Model • 1/10 scale R/C model assembly kit. • Length: 430mm, Width: 243mm, Height: 157mm. • Features a number of carbon fiber-reinforced parts such as upper/lower decks & central torque-splitter diff. • Lightweight wheels are fitted with hybrid spike tires. • High-capacity dampers provide the excellent suspension needed to conquer off-road courses. • Newly-designed parts such as ball differentials and universal joints give smooth power transfer. • Long wheelbase carbon fiber-reinforced chassis is fitted with center one-way. • A number of optional parts, including tires and motors are available to soup up the model even further! 4WD Model kit, Vintage Model, RE-Release, Length: 430mm, Polycarbonate Body, Hi-Cap Alum. Damper, incl. ESC. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC LandRover Defender 90 CC-02

€295.00

Article number: 300058700 Product: 1:10 RC LandRover Defender 90 CC-02 Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Toyota Land Cruiser 40 CC-02

€265.00

Article number: 300058715 Product: 1:10 RC Toyota Land Cruiser 40 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC XV-02 PRO Chassis Kit

€375.00

Article number: 300058707 Product: 1:10 RC XV-02 PRO Chassis Kit Tamiya is proud to announce this shaft-driven 4WD chassis kit for rally cars, an addition to the XV chassis series that will be a popular addition to the R/C rally series. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:12 RC Lunch Box Black Edition

€165.00

Article number: 300058546 Product: 1:12 RC Lunch Box Black Edition If you want to have cool wheelie fun, grab the TAMIYA Lunch Box Black Edition and do fat wheelies thanks to the wheelie bar. The original model appeared in 1987 as a monster that knows no bounds. The current reissue of TAMIYA in the Black Edition is equipped with a black colored ABS body and black rims. Chrome-plated components such as the radiator grille and bumper round off the look. 2-channel RC system with servo, 7.2 V battery pack & charger sold separately. Numerous optional tuning parts available. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

Tamiya RC MB Unimog Bundle

Product bundle consisting of: 1:10 RC MB Unimog 406 U900 (CC-02) / CC-02 Chassis Ball bearing Set (22)   Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.     Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Golf MK2 GTI 16 Rally MF-01X

soon available again

Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC MB G-Class G500 (CC-02)

soon available again

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

Off-road RC cars

1:10 RC Squash Van Painted GF-02

soon available again

Article number: 300047497 Product: 1:10 RC Squash Van 4WD lackiert GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, Pre-painted body, ESC included, Type 540 Motor, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Super Clod Buster 2012

soon available again

Article number: 300058518 Product: 1:10 RC Super Clod Buster 2012 The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:18 RC Dynahead 6x6 (G6-01TR)

soon available again

Article number: 300058660 Product: 1:18 RC Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

Off-road RC cars

1:10 RC Ford F-350 HighLift 4x4 3-Speed

Factory sold out

Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota 4x4 Pick Up Bruiser 2012

Factory sold out

Article number: 300058519 Product: 1:10 RC Toyota 4x4 Pick Up Bruiser 2012 This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance. About the Toyota Hilux Pick-Up　 The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day. Necessary accessories: - 4-channel R/C unit with ESC　 - Battery Pack & Charger - Batteries for transmitter Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.