RC Cars

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Spr. Club MB-01

Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom.155 V6 TI Martini TT-02

Article number: 300058606 Product: 1:10 RC Alfa Rom.155 V6 TI Martini TT-02 Tamiya welcomes a further limited edition re-issue of the Alfa Romeo 155 V6 TI Martini (TT-02) - the latest production was in 2016. This R/C model assembly kit recreates the racy Martini sponsored Alfa Romeo 155 V6 TI, which featured a purpose-developed 450hp-plus 2.5-liter V6 engine mounted in the front, and paired with a 6-speed semi-automatic transmission. A hi-tech flavor was added by electronically controlled front, central and rear diffs, traction control and ABS. It remained in contention for the prestigious 1996 International Touring Car title until the final race. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque-Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Ford Focus RS Custom TT-02 paint

Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC AQROSHOT (DT-03T)

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Golf MK2 GTI 16 Rally MF-01X

€185.00

Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Charleston (M-05)

€145.00

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

On-road RC cars (2WD/4WD)

1:10 RC Ford Mustang GT4 (TT-02)

€150.00

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€165.00

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E

€160.00

Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Audi A4 quattro Touring TT01E

€150.00

Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit.    Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and    no.45 cars (they raced in different touring car series), with    masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy    handling, and great customizability. • A wide range of option parts is available to tune the TT-01    Type-E chassis.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

€155.00

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat Abarth 1000TCR MB-01 paint.

€170.00

Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford GT Mk.II 2020 (TT-02) PB

€160.00

Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Lancia 037 Rally (TA02-S)

€235.00

Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.

On-road RC cars (2WD/4WD)

1:10 RC Lancia Delta HF Integrale TT-02

€170.00

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB 190E debis Zakspeed TT-01E

€150.00

Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC MB G-Class G500 (CC-02)

€295.00

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

On-road RC cars (2WD/4WD)

1:10 RC McLaren Senna TT-02

€160.00

Article number: 300058711 Product: 1:10 RC McLaren Senna TT-02 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the McLaren Senna which has already been released as Item 24355 in the 1/24 Sports Car series!   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD

€165.00

Article number: 300047484 Product: 1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD Tamiya welcomes back the 1/10 R/C 1990 Mercedes-Benz C 11 which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R/C fans. Enjoy running this model with various kinds of chassis setup! WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mitsubishi Lancer Evo V (TT-02)

€150.00

Article number: 300058713 Product: 1:10 RC Mitsubishi Lancer Evo V (TT-02) Tamiya is proud to announce the release of the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC NSU TT Jager (M-05)

€135.00

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

On-road RC cars (2WD/4WD)

1:10 RC Opel Calibra V6 Cliff (TT-01E)

€150.00

Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) Tamiya welcomes the Opel Calibra V6 Cliff R/C model based upon the TT-01 Type-E chassis. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive, overall black body with the Cliff logo caught people’s eye, and this car showed off strength in the races. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€185.00

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 Carrera RSR (TT-02)

€165.00

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

€160.00

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Squash Van 4WD GF-02

€200.00

Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Super Clod Buster Black Edition

€345.00

Article number: 300047432 Product: 1:10 RC Super Clod Buster Black Edition • This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The stylish monster truck body is injection molded in black plastic, with great detail and realism. Metalplated parts are included to depict front grille, supercharger air intakes and roll bars. • Plastic bumper and damper components are red, giving a colorful accent. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that realize ground clearance of 55mm and a superb off-road drive. • Four-wheel steering ensures that the model has excellent handling. • Two Type 540 motors and the dedicated twin motor TEU106BK ESC give ample power via front and rear differential gears. • Stickers are a brand new design for this model. 4WD Monstertruck, assembly Kit, 2 motors, 4-Wheel steering, ABS Body (black), incl. ESC, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Type-SRX Chassis Kit

€340.00

Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02D Drift Spec Chassis

€150.00

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Volkswagen Beetle (M-06)

€190.00

Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC VW Karmann Ghia (M-06)

€175.00

Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Wild Willy 2000 (WR-02)

€200.00

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Scope of delivery: Kit including electronic speed controller as well as detailed and illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 RC Lunch Box Black Edition

€165.00

Article number: 300058546 Product: 1:12 RC Lunch Box Black Edition If you want to have cool wheelie fun, grab the TAMIYA Lunch Box Black Edition and do fat wheelies thanks to the wheelie bar. The original model appeared in 1987 as a monster that knows no bounds. The current reissue of TAMIYA in the Black Edition is equipped with a black colored ABS body and black rims. Chrome-plated components such as the radiator grille and bumper round off the look. 2-channel RC system with servo, 7.2 V battery pack & charger sold separately. Numerous optional tuning parts available. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse (MB-01)

€165.00

Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC au TOM'S GR Supra (TT-02)

€165.00

Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€155.00

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Audi V8 1992 Touringcar (TT-02)

€160.00

Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Buggy Sand Scorcher 2010 2WD

€395.00

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Egress (2013) Lim. Edit. 1989

€430.00

Article number: 300058583 Product: 1:10 RC Egress (2013) LWA 1989 Tamiya is pleased to welcome a modernized version of the Egress into its 2013 line-up. The Egress first appeared in 1989, a 4WD racing buggy based on the Avante and featuring stacks of specialist racing parts. Now, the Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with the competition. Buy this model and you’ll be tearing up off-road circuits in no time! About the Model • 1/10 scale R/C model assembly kit. • Length: 430mm, Width: 243mm, Height: 157mm. • Features a number of carbon fiber-reinforced parts such as upper/lower decks & central torque-splitter diff. • Lightweight wheels are fitted with hybrid spike tires. • High-capacity dampers provide the excellent suspension needed to conquer off-road courses. • Newly-designed parts such as ball differentials and universal joints give smooth power transfer. • Long wheelbase carbon fiber-reinforced chassis is fitted with center one-way. • A number of optional parts, including tires and motors are available to soup up the model even further! 4WD Model kit, Vintage Model, RE-Release, Length: 430mm, Polycarbonate Body, Hi-Cap Alum. Damper, incl. ESC. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC F104 PRO II w/Body

€255.00

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat 131 Abarth Olio Fiat MF-01X

€185.00

Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€155.00

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Ford Escort MkII Rally PB MF-01X

€200.00

Article number: 300058687 Product: 1:10 RC Ford Escort MkII Rally PB MF-01X Rally cars are always an exciting subject, accomplished both on asphalt and flat dirt, and Tamiya is delighted to announce the addition of another to our R/C stable: the Ford Escort Mk.II Rally, depicting a car which was RAC Rally champion from 1975-1979. Fittingly, it is based upon the MF-01X chassis, which has dedicated rally parts and is at home on a range of surfaces. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

Off-road RC cars

1:10 RC LandRover Defender 90 CC-02

€295.00

Article number: 300058700 Product: 1:10 RC LandRover Defender 90 CC-02 Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02

€135.00

Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02 Silver p.

€145.00

Article number: 300047493 Product: 1:10 RC MB CLK AMG 2002 TT-02 Silver p. Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC MB Unimog 406 U900 (CC-02)

€295.00

Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Motul Autech Z 2023 TT-02

€160.00

Article number: 300058735 Product: 1:10 RC Motul Autech Z 2023 TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€180.00

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Rally MB-01

€155.00

Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Renault Alpine A110 Jaeger M-06

€165.00

Article number: 300058708 Product: 1:10 RC Renault Alpine A110 Jaeger M-06 Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version achieved a class victory in German circuit races. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Skyline GT-R (R32) (TT-02D)

€235.00

Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Subaru WRX STI 24hr Nrbg TT-02

€160.00

Article number: 300058645 Product: 1:10 RC Subaru WRX STI 24hr Nrbg TT-02 This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine.

On-road RC cars (2WD/4WD)

1:10 RC T/GR Yaris Rally1 Hybrid TT-02

€140.00

Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four ST205 TT-02

€160.00

Article number: 300058743 Product: 1:10 RC Toyo. Celica GT-Four ST205 TT-02 Tamiya welcomes another classic racing car – this time, the Toyota Celica GT-FOUR (ST205) – paired with our popular TT-02 chassis. Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2-liter 4-cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 paint

€155.00

Article number: 300047500 Product: 1:10 RC Toyo. Celica GT-Four TT-02 paint Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 ST185

€150.00

Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Celica GT-Four TT-02

€150.00

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 2WD

€155.00

Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 paint

€185.00

Article number: 300047505 Product: 1:10 RC Toyota Supra (JZA80) BT-01 paint The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.