Military model vehicles 1:35
Discover the world of 1:35 military model vehicles! These precise models offer you the opportunity to recreate historical tanks, trucks and other vehicles with impressive attention to detail. Perfect for modelling enthusiasts who appreciate authentic military vehicles!
Military model vehicles 1:35
1:35 Ger. Battle Tank IV F L24/75mm
300035374€53.99
Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).
Military model vehicles 1:35
1:35 Ger. Halftr. w/4-Bar.AA Gun (5)
300035050€32.99
Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1) Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Jagdpanzer IV/70 (V) Lang
300035340€59.99
Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kübelwagen T82 Africa (1)
300035238€19.49
Article number: 300035238 Product: 1:35 Ger. Kübelwagen T82 Africa (1) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. The car's interior and under chassis area including the suspension arms and engine guard are realistically reproduced. A standing soldier figure wearing shorts and a short sleeved shirt included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Marder III M Normandy
300035364€48.99
Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.
Military model vehicles 1:35
1:35 Ger. PzKpfw. III Ausf. L (1)
300035215€43.99
Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)
300035209€43.99
Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.
Military model vehicles 1:35
1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)
300035087€23.99
Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1)
300035170€43.99
Article number: 300035170 Product: 1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1) This is a 1/35 scale plastic assembly kit of the Panther tank, which was deployed from 1943 in order to counter the formidable Russian T-34. The kit depicts a Panther Ausf.G, a variant produced from March 1944 which followed the earlier Ausf.D and Ausf.A. The long-barreled 75mm gun has been accurately reproduced and the escape hatch at the rear of the turret may be opened to view the gun breech even after completion. Other hatches on the model may be assembled in either open or closed positions. One tank crew figure and four markings options are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Königstiger Por-T(1)
300035169€47.99
Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Pz VI Kingtiger (1)
300035164€48.99
Article number: 300035164 Product: 1:35 Ger. SdKfz.182 Pz VI Kingtiger (1) With 150mm of frontal armor and 80mm on its sides, the King Tiger was far from a welcome sight for hostile troops; this was rather exacerbated by the awe-inspiring L/71 88mm main gun. This plastic model captures the production turreted King Tiger in all its glory, with masterful depiction of the hull and its weld lines. The opening turret escape hatch allows admiration of the interior and gun breech, even after completion of the kit. Nylon mesh is included in the kit to recreate engine cover nets. Includes belt-type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)
300035286€44.99
Article number: 300035286 Product: 1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)
300035239€89.99
Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger.Tank Destroyer Jagdtiger Ea(2)
300035295€82.99
Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Hummel (Late Production) (3)
300035367€60.99
Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.
Military model vehicles 1:35
1:35 Israeli Tank M51 105mm
300035323€58.99
Article number: 300035323 Product: 1/35 Israeli Tank M51 105mm During the 1960's, the Israeli Ordnance Corps upgraded their M4A1 Sherman tanks by equipping them with the powerful French 105mm CN-105-F1 tank gun and they were redesignated as M51s. The larger gun meant a muzzle brake was installed to minimize the greater recoil effect and a counterweight was fitted to the rear of the turret. The 460hp diesel engine and the combination of the Horizontal Volute Spring Suspension (HVSS) and wider T80 tracks gave the M51 improved mobility. During the Six-Day War in 1967, the M51s were used against newer T-54/55 tanks as well as JS-3 tanks from Egyptian, Iraqi, and Syrian armies. The M51's 105mm gun could take on these adversaries by using HEAT ammunition. After the war, these M51s continued to serve with distinction until they were finally retired in the early 1980s. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ital. MTk. Carro Armato M13/40 (2)
300035296€47.99
Article number: 300035296 Product: 1:35 Ital. MTk. Carro Armato M13/40 (2) During WWII, the Italian army used the M13/40 as its main tank. It featured a riveted construction and bogey-style wheels on a leaf spring suspension with a 47mm main gun featuring on Italy's first ever hydraulically operated turret. In addition, the M13/40 was powered by a 125hp V8 liquid-cooled diesel engine which produced a top speed of 30km/h. From July 1940 through to 1943, approximately 800 units were produced. They fought mainly alongside the German African Corps at the North African front. This is a 1/35 scale plastic assembly kit model. - Length: 143mm. The unique riveted form of this tank is faithfully reproduced. - Easy to connect assembly type tracks included. The suspension features a highly realistic finish. - Metal parts for the gun barrel and photo-etched parts for the anti-aircraft gun sight etc are included. - Other highlights of this model are its range of tools and radiator cap. - A standing figure, a sitting tank crewman figure, 3 kinds of decals for the North African front, and a set of badges of rank are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Jap. Tank Type 1 w/6 Figures
300035331€40.99
Article number: 300035331 Product: 1:35 Jap. Panzer Type 1 mit 6 Figuren The Type 1 Self-Propelled Gun was produced from 1943, and around 140 were manufactured. Due to severe damage suffered during their transportation to the front line in the Phillipines, a large number of Type 1s never actually made it into battle, but those that did are said to have been rated highly by the opposing U.S. forces. About the Item • 1/35 scale plastic assembly kit model. • Length: 173 cm, Width: 67 cm. • This item features Item 35095 Japan Type 1 Self-Propelled Gun and Item 35090 Japanese Infantry Set. • The roofless fighting compartment and 75mm field gun are recreated in excellent detail. • In addition to gunner and loader figures from Item 35095, 4 soldier figures from Item 35090 are included. • Accessories such as armor-piercing and howitzer rounds are also reproduced in scale form. • Features belt-type tracks. • Includes insignia decals for figures. • Comes in a new packaging.
Military model vehicles 1:35
1:35 M561 6x6 Cargo Truck Gama Goat
300035330€36.99
Article number: 300035330 Product: 1:35 M561 Transport-Fahrzeug Gama Goat The M561 Gama Goat was seven years in development until production of the vehicle began in 1968. Its unique name was derived from the creator of its articulated joint, Roger Gamaunt, and its mountain goat-like climbing ability. It was unlike most other military off-road vehicles in that power could go to all 6 wheels of the vehicle, and its aforementioned articulated joint allowed 80° pitch and 60° roll ranges of the carrier module at the rear. Its excellent rough-terrain mobility was tempered somewhat by problems with tricky handling and maintenance, as well as its being rather noisy, but the Gama Goat continued in service until it was effectively replaced by the HMMWV in the late 1980s. About the Model • This is a 1/35 scale plastic model assembly kit. • Length: 170mm, Width: 62mm. • The articulation joint of the M561 is recreated faithfully, and the joint on the model uses a poly-cap to accurately mimic the movement range of the real vehicle. • The model features optional front windshield and front-mounted winch parts. • The complex 6-wheel drive suspension is recreated in a single molded part without sacrificing accuracy. • 1 driver figure is included. • Comes with 3 marking options. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Modern JGSDF Type 10 Tank
300035329€63.99
Article number: 300035329 Product: 1:35 Modern JGSDF Type 10 Tank The Type 10 is the Japan Ground Self Defense Force’s next generation main battle tank. Now, it joins its predecessors the Type 61, Type 74 and Type 90 in the Tamiya 1/35 Military Miniatures series. The Type 10 was first shown to the world in 2010 (that’s where the 10 in its name comes from), and was assigned to units starting in 2012. Among the many advances from the previous Type 90 model are a Japanese-made 120mm smoothbore main gun, and the so-called C4I system. This state-of-the-art computerized system allows the Type 10 to be connected to a computer network and share information with other tanks, enabling co-ordinated actions. About the Model • 1/35 scale plastic assembly kit • Features detailed and faithful replication of modular armor, as well as the 120 mm main gun. • Lower hull rubber skirts and belt-style tracks ensure the base of the model is also highly realistic. • Includes 2 figures to add to the realism of modelers’ dioramas. • Comes with 3 sets of markings. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US 2.5to Cargo Truck (1)
300035218€43.99
Article number: 300035218 Product: 1:35 US 2.5to Cargo Truck (1) During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Light Arm. Tank Greyhound (1)
300035228€35.99
Article number: 300035228 Product: 1:35 US Light Arm. Tank Greyhound (1) The WWII U.S. M8 Light Armored Car depicted by this plastic assembly model kit had a top speed of 88km/h and was often used in reconnaissance roles. Features of the M8 including its plane hull construction, open top turret, and the suspension of the 6-wheel drive have been precisely reproduced. The turret and interior feature a rich finish. It is possible to attach a ring mount and an M2 heavy machine gun onto the turret. Large left and right fenders can be removed after assembly and you can also choose to install racks and anti-tank mine tool boxes on both sides of the model. A figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M113A2 Personal Carr. Desert (2)
300035265€41.99
Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M151A1 Utility Truck Vietnam
300035334€30.49
Article number: 300035334 Product: 1:35 US M151A1 Transportfahrzeug Vietnam The M151A1 was a variant of the M151, a military utility truck which was used by the U.S. Army and Marine Corps from 1959 to the early 1990s. It was first released to troops in 1964, and compared to the original, it had modified rear suspension and also received turn signals on its front fender. Some variants of the M151A1 were equipped with a 106mm rifle, and some even revamped to serve as ambulances. The vehicle also served in the Vietnam War. About the Model • 1/35 scale plastic model assembly kit. • Based on Item 35123, this model receives new parts to accurately recreate the form of the M151A1. New parts include front grille with separate headlight parts, rear panel and swing-arm suspension. • Model can be assembled to show U.S. Army or U.S. Marine Corps vehicle. • Parts to depict canopy roof and 1 figure are also included. • Includes 2 sets of markings to depict vehicles which took part in the Vietnam War. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M26 Tank Recovery Vehicle (6)
300035244€99.99
Article number: 300035244 Product: 1:35 US M26 Tank Recovery Vehicle (6) Hook'em up, Tow'em out! It was a clash that would shape the future of Europe and the rest of the world for years to come. The Allied Liberation of Europe began on the June 6th, 1944, on the beaches of Normandy, and lasted until Germany's surrender on May 9th, 1945. The Sherman tanks of the U.S. Army began their steady advance into the European mainland, wrenching Europe piece-by-piece from the clutches of Germany. However, the massive tanks of the Wehrmacht such as Tiger and Panther would prove overpowering against the agile, yet considerably smaller Shermans. One of the major factors that allowed the Allies' advance to continue despite this disparity in power was the quick recovery and repair of battle damaged tanks. That is where the M26 Armored Tank Recovery Vehicles and their brave crews came in. The M26 first saw action on the Italian Front of 1943, and was later extensively used in the inland advancement of the Allies following the Invasion at Normandy. In all kinds of weather, in the middle of the night, or under a barrage of enemy fire, the repair crews continually fulfilled their duty to recover and repair damaged tanks. About the Model •Overall length: 225mm, overall width: 106mm. •Weighty feel of full sized vehicle very apparent in 1/35 model. •Slide molding techniques used to recreated the cabin as one highly detailed piece. Window armor can be modeled in the open or closed position. Tandem winch and crane overflow with realism. Vice, welding equipment and other accessory parts recreated in outstanding detail. The "A-arm" rear support can be assembled in one of five angles. •Kit features abundant use of metal parts such as photo etched parts, pipes, and chains. Chrome plated and transparent parts used for various lights. Rubber tires with real tread pattern. •Six types of decals are included, as are four figures (two types) for the cabin and two standing figures. Model kit, Scale 1:35, Vehicle, 6 Figures, Decal, Manual, Length 225 mm. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M4A3E8 Easy Eight Korean War
300035359€53.99
Article number: 300035359 Product: 1:35 US M4A3E8 Easy Eight Korean War This model assembly kit depicts the Korean War variant of the M4A3E8 "Easy Eight" Sherman. This kit variant includes new parts! The Sherman – reliable and available in huge numbers - was a gamechanger for the Allies in WWII, and the Easy Eight a prevalent variant most notable for its horizontal volute spring suspension (HVSS) and smooth ride. The Easy Eight's career did not end with WWII, however, as a number were refurbished and thrown back into action by a largely demobilized U.S. Army in the Korean War from 1950. They faced off against T34/85s operated by the Korean People's Army with great success, and were later often used in a supporting fire role.
Military model vehicles 1:35
1:35 US M551 Sheridan (Vietnam)
300035365€59.99
Article number: 300035365 Product: 1:35 US M551 Sheridan (Vietnam) Vietnam Campaigner The lightweight M551 Sheridan was designed as an airliftable tank, a cutting-edge design with aluminum alloy hull and powerful 152mm gun/launcher. Work began on it in 1959, and it was officially adopted in May 1966, with 1,600 produced by November 1970. Its first taste of live action came in the Vietnam War, fulfilling both shelling and offensive roles in a punishing environment, and it would also go on to serve in the Gulf War conflict. Experience taught valuable lessons on the use of the Sheridan, and led to reinforced armor to combat land mines, while some were given a wire netting RPG screen for protection from anti-tank rockets, and even the large gun shield from the M113 ACAV. About the Model ★This is a 1/35 scale plastic model assembly kit of the M551 Sheridan. Length: 185mm, width: 80mm. ★A highly accurate rendering of the powerful form with 152mm gun/launcher based on extensive research of the actual Sheridan. ★Authentically captures a Vietnam War vehicle, with optional chain link anti-RPG net and gun shield. ★Choose open or closed rotating driver's hatch. ★Assembly type tracks feature one-piece straight sections. ★Nylon mesh is included to recreate anti-RPG net and engine grille mesh. ★Clear parts recreate periscope components. ★Comes with commander and loader figures, plus torso driver figure. ★2 Vietnam War marking options are included.
Military model vehicles 1:35
1:35 US M5A1 Light Tank w/Mortar (4)
300035313€29.99
Article number: 300035313 Product: 1:35 1:35 US M5A1 Light Tank w/Mortar (4) The M5A1 light tank which was developed from the M3 Stuart light tank was put into production from January 1943. It was powered by twin four-stroke V8 300hp Cadillac gasoline engines which enabled a top speed of 58km/h. It came armed with a 37mm main gun and two 7.92mm machine guns and featured additional armor plating on the turret's right side to protect the anti-aircraft machine gun. Approximately 6,800 units were produced and were mainly used in reconnaissance roles at the Italian and North West European Fronts. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M8 Howitzer Mo.Ca. w/Fig.(3)
300035312€29.99
Article number: 300035312 Product: 1:35 US M8 Howitzer Mo.Ca. w/Fig.(3) During WWII, the frst American fully tracked Self Propelled Howitzer was the M8. It used the chassis of the M5 and had an open topped turret which was armed with a 75mm Howitzer and 12.7cm M2 machine gun. From September 1942 to January 1944, approximately 1,800 units were produced with the firstM8 seeing action from mid 1943. They were seen used at the Italian and North West European fronts as well as the Pacific Theater for fire support duties. Even after WWII, the M8 could be seen in service with the French army during the Indochina Wars. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A1 Abrams (2)
300035156€42.99
Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A2 Abrams Iraqi Freedom(2)
300035269€56.99
Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. Model kit, Scale 1:35, Vehicle, 3 Figures, Manual, Decal, Length 283 mm.
Military model vehicles 1:35
1:35 US Med. MBT M26 Pershing T26E3 (2)
300035254€53.99
Article number: 300035254 Product: 1:35 US Med. MBT M26 Pershing T26E3 (2) About the M26 Pershing The U.S. Medium Tank M26 Pershing made its appearance at the end of WWII to allow the American army to stand up to the wrath of German tanks. The Pershing which was equipped with a long 90mm gun and exhibited incredible mobility, was first deployed to the European front in February 1945 as part of the effort to invade the German homeland. The Pershing, of which 200 were used against Germany until its surrender, successfully engaged Tiger I and Pz.kpfw. IV tanks. When the Korean War began in June 1950, the M26 also fought successfully against the rival T34/85 Soviet built tanks of the North Korean and Chinese volunteer armies. About the Model ★M26 U.S. Medium Tank Pershing plastic assembly kit. ★Length: 245mm, Turret with its 90mm long barrel gun and boat hull like underside, have been faithfully reproduced with an incredible level of detail. ★Crew hatches can be assembled in either the opened or closed position. Movable suspension forms to the landscape of dioramas. ★Small details like separate parts for the engine grills and cast iron appearance on the hull and the turret make kit seem even more real. ★Machine gun ammunition boxes and two crew figures (torso) are included. Decals for 4 different markings. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Med.Tank M4 Sherman Ea.(3)
300035190€35.99
Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Navy PBR 31 MK.II Pibber Vietnam
300035150€47.99
Article number: 300035150 Product: 1:35 US Navy PBR 31 MK.II Pibber Vietnam This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region. It is recreated with aplomb in this plastic model assembly kit, with details accurately captured from the hull form to the interior. The lethal 12.7mm and 7.62mm machine guns, plus the 40mm grenade launcher are realistically depicted along with a host of accessories such as jerry cans, plus 4 figures.
Military model vehicles 1:35
1:35 US Sherman M4A3 105mm Howi. (9)
300035251€42.99
Article number: 300035251 Product: 1:35 US Sherman M4A3 105mm Howi. (9) About the Model ★Plastic assembly model kit of U.S. WWII M4A3 Sherman. ★Overall length: 172mm, width: 76mm. ★The smooth form of the cast turret with 105mm howitzer and welded hull of this late production M4A3 tank overflow with realism. ★Commander's cupolas, loader's hatch and other hull and turret hatches can be modeled in the open or closed position. ★Two kinds of road wheels and sprockets can be selected; rubber padded tracks also included. ★Three infantrymen and one tank commander in realistic poses bring an air of excitement to the kit. ★Included equipment includes ammunition boxes, tripod, ration boxes, and much more. ★Three types of decals included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Sherman M4A3 75mm Late (9)
300035250€43.99
Article number: 300035250 Product: 1:35 US Sherman M4A3 75mm Late (9) About the Model ★Plastic assembly model kit based on the main tank of the WWII U.S., the M4 Sherman. ★Overall length: 172mm, overall width: 76mm. ★The smooth form of the cast turret with 75mm gun and welded hull of this late production M4A3 tank overflow with realism. ★Two kinds of commander's cupolas; loader's hatch and other hull and turret hatches can be modeled in the open or closed position. ★Two kinds of road wheels and sprockets can be selected; rubber padded tracks also included. ★Three crewman and one tank commander in realistic poses bring an air of excitement to the kit. ★Included equipment includes ammunition boxes, tripod, ration boxes, and much more. ★Three types of decals included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Tank Crew Euro Theater (6)
300035347€21.99
Article number: 300035347 Product: 1:35 US Tank Crew Euro Theater (6) This figure set depicts a typical crew which would have been attached to a tank in Europe after the Normandy landings. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Willys Jeep MB 4x4 (1)
300035219€21.49
Article number: 300035219 Product: 1:35 US Willys Jeep MB 4x4 (1) Without a doubt the Jeep Willys MB occupies a significant position in the whole automotive history. The origin of the Jeep vehicle dates back to early 1941, when U.S. Forces ordered the Willys, Ford, and Bantam companies to develop prototypes of a small sized multi-purpose 4-wheel drive vehicle. During the early stage of WW2, Germany had achieved outstanding successes by using motorized troops with their "Blitzkrieg" tactics. It became a pressing need for allied nations to possess tough and reliable vehicles with excellent cross-country ability. In November 1941, the Army, with alterations on the front grille and hood to the Ford design, chose the Willy"s vehicle as the basis for the mass production model. This marked the birth of the Willys MB (Model B) that provided unmatched ability to transport Allied troops during the conflict. The early Willys MB had a welded, slat type front grille. Due to the necessity of increasing production, the Army ordered Ford to join the mass production using the Willys MB"s blueprints. It was designated the GPW, and a simple, pressed steelfront grille was introduced. During WW2, the Willys MB and Ford GPW ran over every battlefield. As a means of transit for soldiers, it played an important role in bringing the Allied victory. It was also used for liason, command, communication and sometimes even as an ambulance for a light firearms carrier. Production reached approximately 640,000 units by August 1945. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWI Brit. Tank Mk. IV Male (mot.)
300030057€95.99
Article number: 300030057 Product: 1/35 WWI Brit. Tank Mk. IV Male (mot.) Tamiya is delighted to announce its maiden foray into the world of WWI models, in the year which marks the 100th anniversary of the outbreak of hostilities in what was then known as the Great War. The tanks which appeared in the conflict were the first ever seen on the battlefield, and were the forerunners of a whole line of military vehicles which is still being developed further today. The Mk.IV tank was a successor to the Mk.I, which was drawn up by British designers in attempt to break the stalemate of trench warfare experienced on the Western Front; the rhombus-shaped hull was designed to aid in crossing the extensive network of trenches. The Mk.I, first thrown into live action in September 1916 during the Battle of the Somme, had "male" (fitted with 57mm, 6-pound guns) and "female" (fitted only with machine guns) versions. Around 1,000 Mk.IV tanks were manufactured after 1917, and they inherited their shape and male/female weaponry and classifications from the Mk.I, but with significantly upgraded armor. Around 400 were used en masse in the November 1917 Battle of Cambrai to great effect, and with the world cottoning on to the new vehicle’s potential the maiden tank vs. tank battle was not far behind: in 1918, the Mk.IV faced off against its German counterpart the AV7. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Brit.BSA M20 Mot.c./Mi.Police
300035316€20.49
Article number: 300035316 Product: 1/35 WWII Brit.BSA M20 Mot.c./Mi.Police The Birmingham Small Arms Company has a long history as a firearms manufacturer and was also well-known as the world's largest motorcycle manufacturer during WWII. In 1939, BSA began production of a military version of their M20 commercial motorcycle that was fitted with a Lucas light and other additional equipment. It was powered by a 12hp single-cylinder 500cc side-valve engine and offered superb reliability and ease of maintenance. Modifications were made during the course of the production and late-war motorcycles featured an air filter fitted onto the fuel tank. Over 126,000 units were produced during the war and most of them were deployed with the British Army. They saw service on every front for a wide range of duties including liaison and supply convoy escort. Some were also used by the RAF and British Navy. After the war, the M20 continued to serve throughout 1950s and some were even used until the end of the 1960s. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Ger. Cargo Truck 3to (2)
300035291€44.49
Article number: 300035291 Product: 1:35 WWII Ger. Cargo Truck 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 174 mm. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Ger.SdKfz.171 Panther A (2)
300035065€21.99
Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 Ger.Pioneer & Goliath Set
300035357soon available again
Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.
Military model vehicles 1:35
1/35 Wespe Italian Front
300035358soon available again
Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.
Military model vehicles 1:35
1:35 Brit. BT. Matilda Mk.III/IV(3)
300035300soon available again
Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296). Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. M10 IIC Achilles
300035366soon available again
Article number: 300035366 Product: 1/35 M10 IIC Achilles Here is the British Achilles tank destroyer, which appears in Tamiya 1/35 scale for the first time! The Achilles was a modification of the M10s which Britain received from the U.S., with the original 3-inch main gun replaced by the fearsome British 17 pounder. The vast majority of M10s were the M10 IIC variant, which was based upon the late-production M10 with distinctive enlarged turret-rear counterweight. Around 1,000 were produced between Spring 1944 and the end of WWII, the Allied forces making good use of it after the Normandy landings, benefiting from the power of the gun which allowed it to tear through Tiger I front armor. About the Model - This is a 1/35 scale plastic model assembly kit. - In-depth study of the real thing has enabled this highly accurate scale depiction of the Achilles. - Features newly-molded parts depicting the upper hull with its sloped armor, late production M10 turret counterweight, and long 17pdr gun. - Interior features excellent detail, including depictions of shell racks and multi-part 17pdr gun breech. - Comes with 3 full body figures – gunner and loader seated in the fighting compartment, and commander seated on the turret edge – plus a driver torso figure. All are brand new! - Lower hull, suspension, wheel and track parts are carried over from the acclaimed Tamiya 1/35 model of the M10 that served as the Achilles’ base. - New sprocket wheel parts depict late M10 components. - 2 planned marking options depict 93rd Anti-Tank Regiment (Italy, 1944) and 75th Anti-Tank Regiment (NW Europe) vehicles.
Military model vehicles 1:35
1:35 Brit. MBT Challenger 1 Mk.III (2)
300035154soon available again
Article number: 300035154 Product: 1:35 Brit. MBT Challenger 1 Mk.III (2) British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 British Light Utility Car 10HP
300035308soon available again
Article number: 300035308 Product: 1:35 WWII British Light Utility Car 10HP British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fr. Citroen Traction Staff Car (1)
300035301soon available again
Article number: 300035301 Product: 1:35 Fr. Citroen Traction Staff Car (1) This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia. •Length: 125mm, Width: 48mm. •This is a 1/35 scale assembly kit model of the Citroen Traction 11CV. •The elegant form of the body and fenders has been accurately reproduced. •For easy assembly of the suspension, the number of parts is kept in check. •You can choose to assemble either open or closed front doors. •By assembling open front doors, you can enjoy viewing the the highly detailed interior. •Set includes one driver figure. •Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4) •This model will look great in a diorama on its own or with other 1/35 scale models. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 French MBT B1 bis (1)
300035282soon available again
Article number: 300035282 Product: 1:35 WWII French MBT B1 bis (1) Defender of the Republic In May 1940, B1 bis tanks stood in the way of German armies determined to strike a crushing against France on her own soil. Introduced as an upgraded version of the original Char B1, which was developed in the nineteen twenties, the B1 bis entered production in 1937. The rivet-joined hull mounted a short-barreled 75mm howitzer, while a small, one-man turret carried a longer-barreled 47mm tank gun. The B1 bis was one of the most heavily armored tanks of its time, with plating that was 60mm thick in places, more than capable of defending against anti-tank fire such as that from 37mm Pak guns. The B1 bis could more than hold its own against individual German tanks, and was greatly feared by enemy soldiers who encountered it. About the Model ★1/35 scale assembly model of the French B1 bis ★Realistically depicts tank's tall profile, 75mm gun and side armor panels covering suspension mechanisms. ★Hull parts are made using slide molding and feature accurately depicted hex bolts. ★Newly-designed track parts require no cement to assemble and snap together easily by hand. ★Commander's and driver's periscopes are moveable, as is the 75mm main gun. ★Choice of two types of fenders and exhausts, combined with 4 sets of markings allows construction of each possible combination. ★Includes realistic metal tow-chain, and 1 tank commander figure. ★Comes with colorful painting guide and four types of marking decals. ★Reverse side of painting guide features an exciting article about the exploits of B1 bis tanks facing German Panzers Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 French Med. Tank SOMUA S35
300035344soon available again
Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Length 153 mm.