Plastic model kits

Military figures & Accessories 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2

€11.79

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

Military model vehicles 1:35

1:35 WWII SdKfz.223 Light Arm.Vehicle(2)

€25.99

Article number: 300035268 Product: 1/35 WWII SdKfz.223 Light Arm.Vehicle(2) Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Photo- etched parts, Length 140 mm.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Zimmerit Coating Applicator PE

€11.99

Article number: 300035187 Product: 1:35 Zimmerit Coating Applicator PE During WWII, the German army applied Zimmerit coating to their tanks in order to combat magnetic anti-tank mines. ★This set of photo-etched applicator blades will help you to apply Tamiya Polyester Putty to realistically replicate the Zimmerit coating on your model. ★Includes four sizes of applicator blade to allow you to apply a coating on both wide and narrow surfaces.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimmeritdecal f. Panzer IV Ausf.J

€12.49

Article number: 300012650 Product: 1:35 Zimmeritdecal f. Panzer IV Ausf.J Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. These Zimmerit stickers enable easy reproduction of Zimmerit on Item 35181 German Panzer IV Ausf.J. By using this sticker set it will allow novice modelers a way to add Zimmerit to their models without the stress of using a two-part putty.

Model ships 1:350

1:350 Musashi 2013

€114.99

Article number: 300078031 Product: 1:350 Musashi 2013 Jap. Battleship The Musashi was the second ship in the Yamato-class which were the largest battleships ever built. Completed in 1942, the Musashi took part in various campaigns before finally meeting her fate at the hands of U.S. Navy aircraft in the Battle of Leyte Gulf. Tamiya"s precision-made assembly kit model recreates this giant battleship in exquisite detail, including her defensive anti-aircraft suite of numerous single 25mm cannons on the main deck. This different anti-aircraft armament makes for an interesting comparison with the Yamato. Tamiya rereleased Musashi in 1981 and this great model kit is available again with new mast parts. - Comes with a display stand. - Comes with newly-designed mast parts.

Model ships 1:350

1:350 WWII Ger. Battleship Tirpitz

€82.99

Article number: 300078015 Product: 1:350 WWII Ger. Battleship Tirpitz The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display. 1/350 Tirpitz

Model aircraft kits 1:48

1:48 Brit. Supermarine Spitfire Mk.I

€43.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

Model aircraft kits 1:48

1:48 Fairchild Republic A-10A Thunder.II

€38.49

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Messerschmitt

€49.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Model aircraft kits 1:48

1:48 Ger. Focke Wulf Fw190 A-3

€28.99

Article number: 300061037 Product: 1:48 Ger. Focke Wulf Fw190 A-3 The Focke-Wulf Fw 190 served alongside the Messerschmitt Bf 109 to defend Germany from the mid stages of WWII to the end of the war. This kit reproduces the A-3 variant of the Fw 190, which outclassed the RAF's Spitfire Mk.V when it entered service. The aircraft's characteristic radial engine features fine cooling fin and exhaust details. Three marking options, including an aircraft flown by German ace Hans Hahn, are included.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Heinkel He162A-2 Salamander

€40.99

Article number: 300061097 Product: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.     Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

€22.49

Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. V-1 Fiseler Fi103

€14.49

Article number: 300061052 Product: 1:48 Ger. V-1 Fiseler Fi103 Powered by a pulse jet engine, the unmanned V-1 flying bomb developed by Germany during WWII would reach speeds of 640km/h, fly a certain distance, then crash and explode. This kit reproduces the simple form of this weapon and also includes parts to depict a transport trolley.

Model aircraft kits 1:48

1:48 Grumman F-14A Tomcat

€104.99

Article number: 300061114 Product: 1:48 Grumman F-14A Tomcat The Definitive 1/48 Scale F-14A Tomcat From its first test flights in 1970 through to its retirement in 2006, the F-14 Tomcat is a carrier-based fighter that has captured the imagination; its variable sweep wing allowed automatic adjustment for optimum performance and an impressive combination of speed and manouverability. It had a powerful AN/AWG-9 fire control system that could use AIM-54 Phoenix missiles to take on multiple targets from range. 477 of the 632 Tomcats supplied to the U.S. Navy were the early F-14A variant; their delivery to units began with carrier squadrons in 1973, and its combat debut was in the 1975 evacuation from Saigon. It was later in action in conflicts in Libya, Iraq and Afghanistan. Seventy-nine F-14As were also supplied to Iran before the 1979 Islamic Revolution and some still remain in service today. About the Model ★This is a 1/48 scale plastic model assembly kit of the Grumman F-14A Tomcat. Fuselage length: 398mm, Maximum Wingspan: 408mm. ★Designed with access to real F-14A Tomcats for superlative accuracy. ★Features moving depiction of variable sweep wing. ★2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. ★Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. ★Poly caps allow movement of horizontal stabilizers. ★The model offers a choice of parts to depict open or closed engine afterburner nozzles. ★Separate parts are included to depict the fuel probe on the right of the nose, and the ladder on the left. ★Comes with two U.S. marking schemes and one for the Islamic Republic of Iran Air Force.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US F-35B Lightning II

€109.99

Article number: 300061125 Product: 1:48 US F-35B Lightning II Here comes another F-35 Lightning II variant, F-35B in our legendary 1/48 Aircraft Series. Developed under the Joint Strike Fighter (JSF) program, the F-35 integrates multiple functions into its design and there are three types: the F-35A conventional takeoff and landing (CTOL) aircraft, the F-35B short takeoff, vertical landing (STOVL), and the F-35C carrier takeoff and landing (CV). The F-35B was developed as a successor of the AV-8B Harrier II, and the U.K. - which along with the United States Marine Corps. employed many Harrier II -joined this program at early stage. The F-35B is recognized as the aircraft which accomplished both supersonic flight and STOVL by the 3-bearing engine duct nozzle and lift fan, and following the F-35A, the F-35B deployment started in 2015. The first F-35B to see action was an aircraft belonging to the U.S. Marine Corps VMFA-211 "Wake Island Avengers" in Afghanistan, in September 2018. Not only the U.S. and the U.K. but also Italy employs the F-35B, and the Japan Air Self-Defense Force also plans to launch a new fighter squadron with F-35B from 2024 onward. As the F-35B can be operated from both aircraft carriers and airfields featuring short runway, many countries are considering its deployment, and the F-35B looks set to become a significant presence in the skies across the world.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US P-38 J Lightning

€75.99

Article number: 300061123 Product: 1:48 US P-38 J Lightning Our legendary 1/48 Aircraft Series welcomes a new addition in the form of the J variant of the Lockheed P-38 Lightning! The Lockheed P-38 Lightning was an American twin engine fighter aircraft produced by Lockheed; it was the first Lockheed fighter aircraft which was officially adopted into service. The P-38’s variants were used during World War II and they reached about 10,000’s production. Equipped with intercoolers under engines, the P-38J Lightning showed 1,450hp at high altitude and maximum 1,600hp, plus longer range courtesy of fuel tanks in wingtip leading edges in addition to the main fuel tank. As a result, the P-38J offered stable and astonishing performance at any altitudes, and gained great renown among American fighter aircraft.

Model aircraft kits 1:48

1:48 US Vought F4U-1A Corsair

€28.99

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 USN Douglas A1-H Skyraider

€39.99

Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:48

1:48 WWII Diorama-Set Field Maintenace

€19.49

Article number: 300032547 Product: Tank Crew Field Maintenance Set Tamiya provides more 1/48 scale diorama options for military modellers everywhere with the release of this extensive figure and accessory set. Match them with any of our large lineup of 1/ 48 MM German vehicles to add more life to your display. About the Model High quality 1/48 scale German army figure and accessory set. Set includes 9 figures doing various tasks in realistic standing and kneeling poses. Ammunition loading - 4 figures Tire repair - 1 figure Engine maintenance - 2 figures Painting - 1 figure Supervisor - 1 figure Large selection of accurately reproduced accessories and tools included. 88mm ammunition for King Tiger (x2) Wooden case for 88mm ammunition for King Tiger (x2) 88mm ammunition for Tiger I (x4) Wooden case for 88mm ammunition for Tiger I (x2) 75mm ammunition for Panther (x2) Wooden case for 75mm ammunition for Panther (x2) 75mm ammunition for Pz.kpfw.IV (x4) Wooden case for 75mm ammunition for Pz.kpfw.IV (x2) Oil drum (x2) 1 each of the following accessories: Tool Kit, Ladder, Burner, Tool Bag, Wooden Crate, Hammer, Bucket, Jack Crank, Jack, Anvil, Vise, Open Tool Box, Closed Tool Box, Oil Siphon, 18 Liter Can Model kit, Scale 1:48, 9 Figures, Manual.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.5mm OD Bla 2m

€4.49

Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 1mm OD Bla 2m

€4.49

Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model ships 1:700

1:700 Brit. King George V Battleship WL

€22.49

Article number: 300077525 Product: 1:700 Brit. King George V Battleship WL The British battleship King George V entered service in October 1940 as the type ship of the second King George V-class and flagship of the Home Fleet. Among other things, she was involved in the hunt for the German battleship Bismarck in May 1941 together with the HMS Rodney. From 1944 the King George V served in the Pacific. For the surrender of Japan on September 2, 1945, she anchored off Tokyo. In 1949 the HMS King George V was transferred to the reserve fleet, and in 1957 the fleet command finally sent the 35,000-ton battleship into well-deserved retirement. The detailed TAMIYA model on a scale of 1: 700 shows the ship as it looked during the Pacific War with additional radar and anti-aircraft armament.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Mitsubishi A6M2b Zero (Zeke)

€27.99

Article number: 300060780 Product: 1:72 WWII Mitsubishi A6M2b Zero (Zeke) From the early days of the Second Sino-Japanese War to the end of hostilities in the Pacific, the Mitsubishi Zero served as the Imperial Japanese Navy's main frontline fighter. The first major mass-produced version was the A6M2b, which was equipped with 50cm folding wingtips, landing hook, and radio direction finder for carrierbased operations. Flown by expert pilots, the A6M2b took part in daring operations such as the Pearl Harbor attack and the invasion of the Philippines. It's 3,000km range, powerful 20mm cannon armament, and legendary maneuverability quickly earned the respect of Allied aircrews. The Tamiya model assembly kit faithfully reproduces this historic warplane in 1/72 scale. About the model - 1/72 scale plastic assembly kit. - New tooling for wing, fuselage, and engine cowling. - Wing is depicted in extended position only. - One-piece engine cowling via slide molding manufacturing process. - Detailed cockpit and landing gear wells. - Comes with 3 decal marking options to depict aircraft that took part in the Pearl Harbor Attack.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

Avro Lancaster N Mk.I-III

€109.99

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

Braided Hose 2.6mm Outer Dia

€6.19

Model car kits 1:24

Carbon Decal Twill EF

€8.19

Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/extra fine, 130x 190mm sheet size, instructions.

Model car kits 1:24

Carbon Decal Twill F

€8.19

Article number: 300012681 Product: Carbon Decal Twill F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/fine, 130x190mm sheet size, instructions.

Model ships 1:700

Fubuki

€9.99

Model car kits 1:24

Mitsubishi GTO Twin Turbo

€26.99

Model car kits 1:24

Nismo GT-R LM Calsonic

€28.49

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Skyline 2000 GT-R H. T.

€27.99

Military model vehicles 1:35

U.S. M4A3E2 Jumbo

€35.99

Model aircraft kits 1:72

Vought F4U-1D Corsair

€21.49

Article number: 300060752 Product: 1:72 Vought F4U-1D Corsair Designed around the new Pratt & Whitney 2,000HP radial engine and tuning the largest propeller ever attached to a fighter plane, the Vought F4U Corsair became a legend in its own time. The F4U-1 was the first production version of the Corsair. It had an inverted gull wing and a production version of the Corsair. It had an inverted gull wing and a framed canopy with a flat top. However may problems were found soon. For example, the port wing stall often gave the Corsair unstable landing. Anther problem was poor visibility because of its long nose and framed canopy. Therefore F4U-1A: the cockpit was raised about seven inches, the framed canopy was replaced with a semi-bubble design canopy, and the taller tail wheel strut was equipped; was introduced. F4U-1D with clear vision canopy on frameless was introduced later for more visibility. Also the F4U-1D had two pylons under the center wing section that could carry the bombs up to 1,000 ponds and the napalm. Furthermore 5 inch rockets could be carried under each wing. Therefore in1944, the F4U-1D was formally deployed as the first carrier based aircraft of Corsair series. Beginning by placing the F4U 1D as Marine squadrons VMF-124 and VMF 213 aboard the ESSEX on the way to the Phillippines, the F4U-1D was used for attacking Japan as the first operation from U.S. Navy in 1945. About 3,700 amounts of F4U-1D were produced, then it held an established position from U.S. Navy because of its ability and reliance. Detailed Plastic Kit of model Vought F4U-1D Corsair in scale 1:72   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2R

€58.99

Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Ford GT

€53.99

Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Lotus Europa Special

€45.99

Article number: 300024358 Product: 1/24 Lotus Europa Special This is a welcome first re-issue in ten years for our model of the Lotus Europa Special (previously Item 24212), with a number of updates to the kit. The Europa is a lightweight masterpiece of a sports car packed with features more likely seen on a racing car in its era: a sleek, low body, midship mounted engine and FRP frame components. Europas were manufactured between 1966 and 1972, and the Special was the final version of the car. It had a "big valve" 126hp 1,558cc four cylinder engine, five-speed transmission and alloy wheels. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 168mm, width: 73mm. • The honed Europa design and low body are authentically captured in 1/24 scale. • With the removal of the hood, the engine can be viewed even after completion. It features twin carburetor, 5- speed transmission, and shift linkage in the rear, plus new air funnels. • New parts are included for a rear wing and RS Watanabe option wheels. • Y-shaped backbone frame is molded together with rear radius arms as one piece. Front double wishbone suspension, stabilizer, rear upright, and engine are all attached onto this frame. • The floor is directly attached to the built up frame, and the body is mounted on top. • Features redesigned decals, plus new photo-etched parts (front grille) and seatbelt stickers. • A new instruction manual is planned. • A realistic cockpit sports instrument panel, high backed seats, 3-spoke steering wheel, and short gear shift. • Lotus logo, emblems and mirror surfaces are recreated by metal transfers.

Model car kits 1:24

1/24 Mazda MX-5

€47.99

Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1/35 Africa Luftwaffe Art Crew

€15.49

Article number: 300035343 Product: 1/35 DAK Luftwaffe Artillery Crew Increase your diorama options even further with this handy figure and accessory set. It contains parts which were previously only released as components of a larger kit in Items 35283 and 32408. They depict soldiers from an anti-aircraft artillery crew belonging to the Luftwaffe in Rommel’s famed Africa Corps. These men were usually assigned to an 88mm gun and in fact required to take on not only airborne targets but also heavily armored land vehicles such as the Matilda and M3 tanks. Technische Details: Detailed Plastic Kit of Model 1/35 Africa Luftwaffe Art Crew in Scale 1:35   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1/35 Hummel Metal Gun Barrel

€12.79

Article number: 300012688 Product: 1/35 Hummel Metal Gun Barrel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.

Military model vehicles 1:35

1/35 M3 Stuart Late Production

€40.99

Article number: 300035360 Product: 1:35 US M3 Stuart Späte Produktion This 1/35 scale model faithfully depicts the M3 Stuart tank. It is a complete new kit with updated details compared to the Stuart model that has been offered for decades. The M3 Stuart was manufactured from March 1943 onwards and deployed not only by U.S. forces; it also saw action in Soviet colors. The late production variant of the tank had a rounded turret design with the cupola removed. It used a 37mm main gun, with numerous 7.62mm machine guns: one coaxial to the main gun, one on the front, on the turret and in the side sponson’s on certain variants.

Military figures & Accessories 1:35

1/35 Panther D Metal Barrel

€15.79

Military figures & Accessories 1:35

1/35 Sheridan Metal Barrel w/ PE-Parts

€17.99

Article number: 300012687 Product: 1/35 Sheridan Metal Barrel w/ PE-Parts Add even more realism to your Vietnam War-era M551 Sheridan with this detailed set including precision gun barrel and photo-etched parts! • Aluminum Gun Barrel x1 • Photo-Etched Part Frets x2 • Turned aluminum depiction of the powerful 152mm gun/launcher barrel features very sharp detailing and no need for cleaning up of seams, etc. • Photo-etched parts recreate anti-RPG net and hull-top engine grilles for a superbly realistic finish. • Compatible with item 35365 US Airborne Tank M551 Sheridan.

Military model vehicles 1:35

1/35 Sherman Easy8 EuroTheater

€52.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Valentine Mk.II/IV

€49.99

Article number: 300035352 Product: 1:35 Brit. Valentine Mk. II/IV This is an all new tooled model of the British Valentine Infantry tank in 1/35 scale. British armor doctrine in the 1930s up to the outbreak of WWII called for 2 types of tank - more mobile cruiser tanks and heavy, slow infantry tanks. The Valentine was a prolifically produced example of the latter (7,315 units, more than 30% of British tank production in WWII). It was based upon existing cruiser tank designs and relatively easy to manufacture, a critical point for the British military after it had lost so much material during the Dunkirk evacuation in 1940. The Valentine would see extensive action in North Africa, particularly the Mk.II and Mk.IV variants (they had different engines) depicted by this kit. Over 4,500 were also handed over to the Soviet Union under the lend-lease agreement, the Red Army using them mainly for recon work.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 British 7ton AC Mk.IV

€21.99

Article number: 300032587  Product: 1/48 British 7ton AC Mk.IV   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Heavy Tractor SS-100

€25.99

Article number: 300032593 Product: 1/48 Heavy Tractor SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Howitzer MotorCarriage M8

€22.49

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Panther Ausf.D

€32.99

Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.

Model aircraft kits 1:72

1:100 Space Shuttle Atlantis

€66.99

Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S

€54.99

Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 888 Superbike ´93

€34.99

Article number: 300014063 Product: 1:12 Ducati 888 Superbike ´93 About the Ducati 888 Superbike Racer On the 26th of September 1993, a young and inspiring motorcycle racer named Tetsuya Harada was adding the final touches to his machine at the Jarama racing circuit, just prior tot he last round of the season. This would make him the first Japanese World Champion since 1977. His closest rival, Loris Capirossi, was ahead in point standings going into this last race, but bad luck plagued him during the dynamic battle for the 250cc GP2 title. Although this was Harada's debut season for the World Grand Prix, he had been working closely with Yamaha for the last couple of seasons, perfecting the works TZM bike, which allowed him to win the 1992 All Japan Championship title. The 1993 Yamaha TZ250M used a 249cc liquid cooled V-twin cylinder engine capable of 94 horsepower. Its crankcase reed valve induction system was combined with an electronically controlled exhaust valve system. The highly sophisticated six-speed gear box used an electronic cut-out gear changing system that eliminated clutch operation and minimized racing stresses. This awesome powerplant was mounted on Yamaha's exceptionally rigid twin-spar box-section aluminum frame that was capable of head angle adjustments. The rear suspension was also of box-sectioned aluminum to withstand the enormous power and traction. The bike rides on Marchesini cast magnesium wheels matched to Dunlop radial tires. The superb stopping power was achieved by front Brembo and rear Nissin Brake systems.  

Model motorcycle kits 1:12

1:12 Ducati Desmosedici #65 MotoGP´03

€50.99

Article number: 300014101 Product: 1:12 Ducati Desmosedici #65 MotoGP´03 About the Model Detailed 1/12 assembly model kit of the 2004 Ducati Desmosedici ★Model accurately depicts trademark Ducati style, such as truss-frame and V4 engine with rear suspension swing arm directly attached to crank case. ★Accelerator, clutch and brake wiring masterfully depicted with plastic tubing. ★Synthetic rubber tires look and feel like authentic racing slick tires ★Side and seat cowling can be removed after assembly allowing full display of engine ★Due to sponsor's request, white marking decals are not included with this kit.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Fig. Street Rider

€18.29

Article number: 300014137 Product: 1:12 Fig. Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a finely molded figure with excellent detail including natural rendering of folds and creases on the clothing. • Included are parts to make either of two different options: i) the rider helmeted and pulling on his gloves, ready to mount the bike; or ii) the rider having just got off the bike, helmet in hand and with a wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Gabel-Set Suzuki GSX-RR 2020

€36.49

Model motorcycle kits 1:12

1:12 Honda CB 750F Custom Tuned

€27.49

  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CBR110XX Super Blackbird

€38.49

Article number: 300014070 Product: 1:12 Honda CBR110XX Super Blackbird Capable of hitting speeds in excess of 300km/h is the 1996 released super sports Honda CBR1100XX, which now comes accurately reproduced as a plastic assembly model kit. ★The individualistic aerodynamic form of the CBR's cowling and the high performance liquid-cooled inline 4-cylinder engine, frame, and suspension, have all been precisely modeled. ★The engine and cowling can be attached to the frame with small screws allowing you to further understand the mechanics of the motorcycle. ★Parts such as the dual headlight case, exhaust, and front forks are depicted with metal plated parts to provide the model with greater realism.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition

€27.99

Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre.

€56.99

Article number: 300014111 Product: 1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre. When Kawasaki announced the ZZR1400 it continued their tradition of producing the strongest bike in the hyper sport category. It attracted much attention due to its impressive design and specifications. The ZZR1400 had such a great road presence and strong character, that it exceeded expected sales forecasts. In America it was given the official name "ZX-14" but is more widely recognized by its nickname "Ninja". The ZX-14 is currently known as the world's most powerful sports motorcycle. The motorcycle also featured a tandem seat fairing and an under diffuser. In addition to the standard coloring, a fire pattern livery was given to the American market for special use.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100 Katana Cust.Tuned

€28.49

Article number: 300014065 Product: 1:12 Suzuki GSX1100 Katana Cust.Tuned Making its sensational debut at the 1980 Cologne Motor Show, the Suzuki GSX1100S Katana came with special parts and a customized finish which has been accurately portrayed by this plastic assembly model kit. ★The air-cooled 4-cylinder DOHC engine and its cooling fins have a precisely reproduced finish. ★Engine parts including the front mounted oil cooler and the Katana's exhaust are included in the set and provide the model with greater realism. ★Custom parts including the front and rear brakes, large diameter front rotor with 4-pod calipers, and small diameter rear floating calipers are realistically reproduced to help capture the ever lasting presence of the Katana.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Team Suzuki ECSTAR GSX-RR 2020

€55.99

Kit model, scale 1:12, racing version, engine, frame, fairing ung, racing motorcycle stand, slick tires, exhaust system, instructions, Decal, length 178mm.