Model kit glue
For a permanent hold and precise connections: our modelling adhesives offer you the perfect solution for every construction phase. Whether for intricate details or large components — here you will find the right model kit glue to complete your models reliably and cleanly. If you would like to find out more about our adhesives, you can read more here.
Model-making adhesive
Body Set R/C PC Reinf Mesh Tape (2m)
300054792€10.791 m = €5.40
Article number: 300054792 Product: Body Set R/C PC Reinf Mesh Tape (2m) This polycarbonate reinforcing mesh tape is the perfect solution for hobbyists that are a little more than rough with their bodies. With this tape you can easily reinforce spoilers, fenders and the like with this handy mesh type tape, simply apply clear silicone adhesive to secure the mesh tape in place. Item Contents •2-meter roll of mesh tape (35mm width) x1 •Apply to the inside of the body, on the area you wish to reinforce •Fix into place with separately sold clear silicone adhesive found at local hardware stores
Model-making adhesive
Tamiya Cement w/Brush 20ml
300087012€3.791 l = €189.50
Article number: 300087012 Product: Tamiya Cement w/Brush 20ml This is liquid type glue. It will work for strengthening the Dangun Racer's body. In the assembly of the body, apply this glue on parts to be fitted together, then fasten the parts with screws. This secure construction brings you a sturdy body ready to battle.
Model-making adhesive
Tamiya Extra Thin Cement w/Brush 40ml
300087038€6.791 l = €169.75
Article number: 300087038 Product: Tamiya Extra Thin Cement w/Brush 40ml Tamiya EXTRA THIN model cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse. Warning! Not suitable for children under 14 years.
Model-making adhesive
Mark Fit (Strong) 40ml
300087135€4.991 l = €124.75
Article number: 300087135 Product: Mark Fit (Strong) 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This "strong" version has a more powerful formula for softening decals compared to the standard version. The Strong version help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. The Bottle cap comes with brush applicator and contains 40ml of solvent. Note: May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely. Warning! Not suitable for children under 14 years.
Model-making adhesive
Tamiya CA Cement Gel Type 3g
300087091€4.991 kg = €1,663.33
Article number: 300087091 Product: Tamiya CA Cement Gel Type 3g TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives. Warning! Not suitable for children under 14 years.
Model-making adhesive
Tamiya CA Cement Quick Type 2g
300087062€5.781 kg = €2,890.00
Article number: 300087062 Product: Tamiya CA Cement Quick Type 2g TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives. Warning! Not suitable for children under 14 years.
Model-making adhesive
Limonene Cement Extra Thin
300087134€7.691 l = €192.25
Article number: 300087134 Product: Limonene Cement Extra Thin ★Extra thin cement is very useful for plastic model assembly as it can be flowed into areas like small gaps between plastic parts and does not leave marks when dried. ★The bottle's cap comes with a convenient brush. ★1 bottle contains 40ml of cement. Warning! Not suitable for children under 14 years.
Model-making adhesive
Mark Fit 40ml
300087102€4.991 l = €124.75
Article number: 300087102 Product: Mark Fit 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely. Mark Fit Warning! Not suitable for children under 14 years.
Model-making adhesive
Mark Fit (Super Strong) 40ml
300087205€5.991 l = €149.75
Article number: 300087205 Product: Mark Fit (Super Strong) 40ml This Super-Strong Mark Fit is ready to enable perfect application of your decals by softening them so they fit easily to uneven, rounded and matte finished surfaces. It joins standard (Item 87102) and Strong (Item 87135) Mark Fit products on the market, and is for use on thick decals or extremely difficult target surfaces. Set Contents/Information • The bottle comes with a brush applicator on the underside of the cap. • Bottle contents: 40ml. • This is a more powerful formula than other Mark Fit products and may damage some kinds of decal or affect painted surfaces. Recommended for advanced users.
Model-making adhesive
Tamiya CA Cement Easy Sanding
300087187€7.191 kg = €2,396.67
Article number: 87187 Product: Tamiya CA Cement Easy Sanding TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives. Warning! Not suitable for children under 14 years.
Model-making adhesive
Tamiya Limonene Cement
300087113soon available again
Article number: 300087113 Product: Tamiya Limonene Cement TAMIYA Quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives. Content: 40 ml Warning! Not suitable for children under 14 years.
The importance of model making adhesives
Choosing the right adhesive is crucial for the success of your projects. Whether you're joining delicate parts or large components, the choice of glue determines the stability and durability of your models. Our range includes various model making adhesives tailored to different materials and requirements, ensuring that every bond is secure.
Different types of model making adhesives
In the following sections, we’ll introduce you to some different types of adhesives for model making:
Superglue for quick bonds
Superglue is ideal when you need a fast bond. Our Tamiya Superglue Gel dries instantly and provides a strong connection that can be immediately handled. It is particularly suitable for small parts that need to be fixed quickly and precisely. However, make sure to apply the superglue sparingly and accurately, as it hardens instantly.
Plastic glue for plastic models
For plastic models, plastic glue is the best choice. This model making adhesive slightly dissolves the material, chemically bonding the pieces together. This creates a strong connection, particularly well-suited for building polystyrene models. Plastic glue also ensures a clean finish with no visible glue marks. Why not try Tamiya Plastic Glue in 20ml or 40ml sizes, complete with an ultra-thin brush for precise application?
Special adhesive for delicate work
For especially fine and intricate models, a special adhesive is the perfect solution. Its extra-thin consistency allows even the smallest parts to be bonded with precision. This model making glue penetrates deep into cracks and gaps and leaves no visible glue marks: ideal for challenging projects where the highest level of precision is required. Try the extra-thin plastic glue with a lemon scent, putting an end to strong glue odours once and for all.
Application tips for perfect gluing results
For clean and stable bonds, it is important to apply model making glue correctly. Make sure to thoroughly clean and dry the surfaces beforehand. For very small parts, it’s advisable to use adhesives with a fine applicator tip to achieve precise results. Avoid applying too much glue, as this can leave unsightly glue marks, and remember to close the glue promptly after use.
Explore our wide range of model making adhesives
Whether you're looking for the best glue for plastic models or specialised adhesives for intricate work – we have the right product for your project. Explore our versatile selection of model making adhesives and find the perfect glue for your next build!
