TAMIYA Product Range
Discover the fascinating world of TAMIYA model making! Here you will find everything your heart desires: from RC cars and model cars to an extensive range of modelling accessories. Immerse yourself in high-quality and detailed replicas: perfect for beginners and professionals alike!
Military model vehicles 1:48
1:48 US M10 Mid Production
300032519soon available again
Article number: 300032519 Product: 1:48 US M10 Mid Production Between 1941 and 1942 the M3 self-propelled gun was the backbone of the US anti-tank division. Consisting of the M3 half-track with mounted 36 caliber 75 mm anti-tank gun, it proved ineffective in fighting German armour, calling for a more manoeuvrable tank destroyer with increased firepower. In November 1941 a prototype T35 tank destroyer was manufactured. Officially adopted in June 1942 under the designation M10, it was the US Army's first full-track tank destroyer. The M10 had the lower chassis from the M4A2 Sherman, but was fitted with a lower, redesigned upper section. Designed for maximum manoeuvrability, the M10's armour was relatively thin. To compensate for this weakness, an angled chassis was chosen to increase bullet deflection. A 50 caliber M7 3-inch (76.2 mm) cannon was mounted in the rotating, open-topped turret. Firing M62 capped armour-piercing shells (APC), the M7 3 gun could penetrate 88 mm armour at a range of 1000 m with an impact angle of up to 30 degrees. The M10 featured a GMC 6064 (or 6064D) 2-stroke water-cooled diesel engine that produced 375hp for a top speed of 48 km/h. The M10 was fitted with a counterweight at the rear of the turret, with early designs carrying box weights and later triangular weights. Serial production ran from September 1942 to December 1943 for a total of 6706 vehicles, including those with M10A1 petrol engines. Model kit, Scale 1:48, Vehicle, Manual, Decal, Length 143 mm.
Model aircraft kits 1:48
1:48 Bristol Beaufighter Mk.6
300061053soon available again
Article number: 300061053 Product: 1:48 BRISTOL BEAUFIGHTER MK.6 About the Bristol Beaufighter Mk.VI Bristrol's "Beaufighter" was one of the most successful and widely used twin engines fighter types during WW2. The first series production Beaufighter MK.1 entered service in September 1940. With its four nose-mounted 20mm cannons and six 7.7mm machine guns in the wings, this stub-nosed fighter became the most heavily armed aircraft in service with the RAF during the war. As the German Luftwaffe eventually turned to night bombing in autumn of 1940, priority was put on night fighters and the first operational Beaufighters were fitted with the Airborne Interception (AI) radar, which designated the Mk.1F (F was suffix for Fighter Command). Meanwhile, its rugged construction was thought ideal for long range fighting and escort duties, and the Mk.1C under the Coastal Command became ready for initial operations in late March 1941. Introduction of the more powerful, 1,670hp Hercules VI engines by late 1941 resulted in the Mk.VI. A 7.7mm machine gun being added in the observers canopy for rearward defense, and the horizontal tail plane was modified to have a 12 degree of dihedral, to eliminate the unstable characteristics observed on the preceding types. The Beaufighters saw active service not only above Europe but also in the Mediterranean, North Africa, Middle East and Pacific area. More than 5,900 Beaufighters of various types were produced. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Brit. Supermarine Spitfire Mk.I
300061119soon available again
Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.
Model aircraft kits 1:48
1:48 Ger. Messerschmitt Bf109 E3
300061050soon available again
Article number: 300061050 Product: 1:48 Ger. Messerschmitt Bf109 E3 About the Messerschmitt Bf109 E-3 Without a doubt, the Messerschmitt Bf109 can be claimed as the most famous and successful German aircraft from the WW2. It was the world's most advanced fighter at the time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible airframe built around the most powerful engine available. It also boasted many of the then innovative features such as an all metal stressed skin construction, retractable main landing gear, automatic Handley-Page leading edge slats, etc. The Bf109 saw first combat during the Spanish Civil War and fully demonstrated its exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvement throughout its career, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used an improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through the propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 Ger. Pz.Kpfw.IV Ausf. H Late Prod.
300032584soon available again
Article number: 300032584 Product: 1:48 Ger. Pz.Kpfw.IV Ausf. H Late Prod. The Panzer IV was one of the most feared weapons in WWII, and would serve German forces throughout the conflict in the guise of a number of variants. The Ausf.H variant itself featured early, middle and late production types, all of which were armed with a L/48 75mm gun and featured "Schürzen" armor side skirts for greater protection. Late production Panzer IVs were identifiable by their tracks: they lacked a center guide. Upper road wheels had their rubber tires removed and were made into steel wheels, while the tank received cast metal idler wheels. 3,774 Ausf.H Panzer IVs were produced between April 1943 and July 1944, and it was eventually succeeded by the Ausf.J. The Tamiya model in 1/48 scale captures every detail and nuance of the real life subject thanks to extensive research of the full size vehicle. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 US M1A2 Abrams
300032592soon available again
Article number: 300032592 Product: 1:48 US M1A2 Abrams This small-scale Military Miniature series model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock-full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola, and more, and saw action in the conflict in Iraq in 2003. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US P-38 F:G Lightning
300061120soon available again
Article number: 300061120 Product: 1:48 US P-38 F:G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.
Model aircraft kits 1:48
1:48 USN Douglas A1-H Skyraider
300061058soon available again
Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 WWII Ger. Steyr Type 1500A/01 (1)
300032549soon available again
Article number: 300032549 Product: 1:48 WWII Dt. Steyr Type 1500A/01 (1) About the Model 1/48 scale assembly kit model of the Steyr Type 1500A/01. Distinctive shape of the engine hood and features such as the side mounted spare tire accurately reproduced. Front doors may be modeled in both open and closed positions for increased display possibilities. Die-cast chassis provides added weight that gives the model greater realism. One driver figure included. 3 types of high-quality markings are also included. A great display in and of itself, it is also perfect for dioramas with other Tamiya 1/48MM vehicles, aircraft, figure sets, and accessory sets. Model kit, Scale 1:48, Vehicle, 1 Figure, Manual, Decal, Length 108 mm. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 WWII Ger.Kettenkrad w/Airc.Pow.Sup.
300032533soon available again
Article number: 300032533 Product: 1:48 Ger. Ketenrad w/Airc. Pow. Sup. The Aircraft Power Unit: The "starter car" was used to start aircraft, extending battery life. The chain motorbike: A unique half-track motorbike as a light towing vehicle. Model kit, Scale 1:48, Vehicle, Manual, Decal, Length 53 mm, (Aircraft not included). Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:6
1:6 Honda CB750F 1979
300016020soon available again
Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:6
1:6 Suzuki GSX1100S Katana 1980
300016025soon available again
Article number: 300016025 Product: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market Warning! Not suitable for children under 14 years.
Model aircraft kits 1:72
1:72 F-51D Mustang North American
300060754soon available again
Article number: 300060754 Product: 1:72 F-51D Mustang North American Sketched out in a New York city hotel in April 1940, the North American Aviation Corporation NA73X went on to become one of the best fighters to come out of World War 2. The U.S. Army Air Corps gave it the title of P (for Pursuit) 51, and it was named Mustang by the British. Of the several variations of the Mustang, the P-51D is considered the definitive version and was the first to have the bubble canopy. More "D" models were built than any other variant, with a total of 9,603 being produced. Armed with six .50 caliber machine guns, three in each wing, with 400 rounds for each inboard gun and 270 rounds for the other four, plus underwing pylons for auxiliary fuel tans or 1000lb bombs, the Mustang was a true fighter pilots airplane. At the conclusion of WW2, Mustangs were in operation all over the world, flying in several nations air forces. When the Korean conflict broke out, hundred of F (for fighters) 51's were in Japan awaiting scraping. Because they possessed too slow speed maneuverability that was absent in the new jets then entering service, the F-51 was ideal to work with Forward Air Controllers (FAC's) on the ground in Korea. The major drawback to this was the F-51's liquid cooled engine susceptibility to anti aircraft and small arms fire when attacking ground targets. This caused the Mustang to have the highest loss ratio of any aircraft in Korea. A total of 194 were lost in three years, with only 10 being downed in combat with other aircraft. Detailed Plastic Kit of model North American F-51D Mustang in scale 1:72 Warning! Not suitable for children under 14 years.
Model aircraft kits 1:72
1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp
300060784soon available again
Article number.: 300060784 Product: 1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp The 1/72 scale Warbirds Collection welcomes the A6M3 Zero fighter Model 32, which was codenamed ‘Hamp’ by American forces. The Model 32 was an evolution of the Model 21; it received an improved Sakae 21 engine and shorter, redesigned main wing, with the effect that its top speed increased by 11km/h and it also had improved roll and diving speed, albeit at the cost of increased fuel consumption. In fact, this plus with the Model 32’s smaller fuel tank meant its range was some 1,000km shorter. The Model 32 made its maiden flight on July 15th 1941, and first saw service with the 2nd Fighter Group in Rabaul, the Philippines. All told, 343 Model 32 aircraft were manufactured, a number so low in part due to the range limitations of the aircraft. About the Model • This is a 1/72 scale plastic model assembly kit. • The model faithfully replicates the form of the A6M3 Zero Model 32 with square-shaped wings. • Main wing, fuselage, and engine cowl are all newly-designed parts. • Features such as flaps integrated with wing parts make this model easy to build while still retaining an excellent grasp of the aircraft’s details. • 3 sets of markings included.
Model motorcycle kits 1:12
Honda CB750F
300014006soon available again
Article number: 300014006 Product 1:12 Honda CB 750F The Honda CB750F Motorcycle appeared on the Japanese market in June 1979 and was shortly to become the best seller in the 750 class. Just ten years prior to their 750F release, Honda opened up the field of multicylinder bikes with their now famous four cylinder CB750. Honda had won several Grand Prix motorcycle races with multi-cylinder bikes, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power, and so shocked the industry that shortly many of the famous makers produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 4 cylinder 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB750K DOHC with four valves per cylinder, a powerful 68hp, and new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F which had been copied from their racing RCB bike. This styling was new to stock motorcycles in the world. With the low positioned handle bars and rear positioned foot rests, allowed a "slouched" riding position. The style is setting the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, semi-air front suspension system, and FQV damped rear coils. Braking utilizes the dual piston caliper system, with dual discs in front and a single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very popular among the bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will stay at the forefront of sales for years to come. Honda CB750F
Other model kits
Mesozoic Creatures
300060107soon available again
Article number: 300060107 Product: Mesozoic Creatures Not everything which lived during the age of the dinosaurs was a massive sauropod. This assembly kit set depicts a variety of smaller dinosaurs such as adolescent Parasaurolophus and Tyrannosaurus as well as Oviraptor and Hypsilophodon. A crocodile as well as an example of an ancestor to today's birds are also included. Use them to populate your dinosaur dioramas. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's knife blade (25)
300074075soon available again
Article number: 300074075 Product: Modeler's knife blade (25) 25 replacement blades for the Modeler's Knife come in a plastic container. Change worn blades promptly to ensure your Modeler's Knife provides ideal performance.
Model aircraft kits 1:72
P-47D Thunderbolt Bubbletop
300060770soon available again
Article number: 300060770 Product: 1/72 P-47D Thunderbolt Bubbletop About the P-47D Thunderbolt One of the most famous planes of WWII, the P-47D Thunderbolt was an outstanding single seat fighter plane excelling in high-altitude bomber escort and low-altitude ground attack. The P-47D featured a turbo-supercharged engine and was active on both the European and Pacific fronts. To solve the problem of insufficient visibility of earlier models, later Thunderbolt models were redesigned with a transparent bubble canopy, leading to the birth of the "Bubbletop". About the Model •Following the successful release of the P-47D "Razorback", Tamiya now introduces its successor, the "Bubbletop" to the 1/72 scale War Bird Collection. •At just 153mm it is the perfect size for collecting •Fuselage and canopy designed with all new parts to accurately represent bulky size •Loads of accessories including 500 pound bombs and M10 rocket launchers •Decals for 2 types of markings, including the 8th Air Force, 78th Fighter Group. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:72
P-47D Thunderbolt Razorback
300060769soon available again
Article number: 300060769 Product: 1/72 P-47D Thunderbolt Razorback The P-47 was the first single-seated fighter to be equipped with a supercharger paired with a 2000hp engine, allowing it to fly at the same high altitude as bombers. Armed with eight 12.7mm machineguns, the Thunderbolt, with the P-51 Mustang, constituted the main fighters of the US Army Air Force. This is the representation of P-47D early production that was nicknamed "razorback" because of the shape of its upper fuselage behind the cockpit. The P-47D was a high-speed, high-altitude capable fighter and escorted the allied bombers that were conducting raids over Germany. Its 1-ton payload and its robustness made the Thunderbolt the perfect aircraft for ground attacking missions. About the Model •Sharp design of rear fuselage accurately reproduced. •Unique belly shape perfectly replicated thanks to left-right symmetrical construction. • Joining beams used to attach wings to fuselage, ensuring accurate wing angle. •Loads of accessories including 2 x 108 gallon tanks, 2 x 500 pound bombs and 2 x M10 rocket launchers. •For extra accuracy, kit comes with two different propellers to match decal markings. •Decals for 2 fighter groups, including one from Europe and one from the Pacific. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
Super Astute (2018)
300047381available from January
Article number: 300047381 Product: Super Astute (2018) Tamiya is delighted to announce the updated re-issue of another classic: the Super Astute (originally released as Item 58097 back in 1991). The basic construction and design of the model remains true to the original, with various minor upgrades. Super fun off-road driving awaits with this high-performance 2WD buggy’s rugged chassis, durable suspension and TTC (Tamiya Traction Control system). About the Model • This is a 1/10 scale 2WD R/C model assembly kit. • 2.5mm thickness FRP chassis gives a low center of gravity for excellent balance. The battery pack position has been slightly enlarged. Please note it is not compatible with square-shaped battery packs. • 4-wheel double wishbone suspension employs CVA oil dampers. • Sealed gearbox features TTC, which was Tamiya's first slipper clutch and protects gears from impacts and gives stable drive by limiting wheelspin. Externally the same as on the original, it features a modernized internal design, and can be adjusted simply by removing the gearbox cover and turning the lock nut. • Efficient 0.5 module gear included. • A low-profile servo is required for this model. • High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. • Comes with durable and lightweight polycarbonate body and rear wing, plus a protective undercowl. Warning! Not suitable for children under 14 years.
Model-making tools
Tamiya Basic Tool
300174016soon available again
Article number: 300174016 Product: Tamiya Basic Tool This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.
Model-making tools
Tamiya HG RevAction Angled Tweezers
300074102soon available again
Article number: 300074102 Product: Tamiya HG RevAction Angled Tweezers Compared to standard tweezers, the operation mechanism for these tweezers is reversed: squeeze the handle to open and release to close. As such, these tweezers can be easily wielded while they are holding objects, thereby greatly reducing hand fatigue. The angled tip also enables access to tight spaces. Tweezers are made from stainless steel and feature vulcanized fiber grips. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
Tamiya Nissan Skyline Bundle
BDL-300058651soon available again
Product bundle consisting of: 1:10 RC Skyline GT-R (R32) (TT-02D) / 1:10 Wheel Set Drift (4) black/red / Corner marker 10x red 10x white / LED Light Set Drift Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. Article number: 500900157 Product: 1:10 Wheel Set Drift (4) black/red The drift wheels are suitable for on-road vehicles in a scale of 1:10 with 12 mm standard hex wheel hub. The tyres are made of hard plastic. The pre-glued & ready to run wheels are designed for long drifts on smooth tracks. The black rims in Y-design as well as the attractive red rubber strip set an optical accent. Article number: 500906153 Product: LED Light Set Drift Features: • flash light front l./r. 3 mm • flash light rear l./r. 3 mm • head light l./r. 5 mm (4x) • rear light/break light l./r. 5 mm • ground light blue l./r. and front/rear (4x) • demo mode Scope of delivery: LED-controller, 10x LED and 4x LED-tubes Warning! Not suitable for children under 14 years.
Model-making tools
TAMIYA Painting Stand Set
300074522soon available again
Article number: 300074522 Product: TAMIYA Painting Stand Set The Spray-Work Painting Stand Set makes airbrushing and spray painting so easy! A multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting1/24 scale cars. The width of clips can also be adjusted to obtain the most stable hold. Can be used with Model Painting Booths Both body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free. Painting Stand Set Warning! Not suitable for children under 14 years.
Model-making abrasive material
TAMIYA Sanding Sponge Sheet 2000
300087170soon available again
Article number: 300087170 Product: TAMIYA Sanding Sponge Sheet 2000 Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Note: Suitable for wet sanding use. • Tamiya Sanding Sponge Sheet x1 • Dimensions: 114 x 140mm • Abrasive material: Aluminum oxide • Sponge thickness: 5mm 9 different levels of abrasion available (Each sold separately): 180, 240, 320, 400, 600, 1000, 1500, 2000, 3000 Warning! Not suitable for children under 14 years.
Model-making tools
TRF Alum. Maintenance Stand 160x100x42mm
300042371soon available again
Article number: 300042371 Product: TRF Alum. Maintenance Stand 160x100x42mm Space-efficient and safe are the watchwords for this new product, which will help re-define the way you work on your car in the pit. Tamiya logos and coloring will catch the eye, too. Item Contents/Information • Crafted in aluminum, the stand has the iconic Tamiya blue anodized finish, and comes with the TRF and twin star logos on its side. • Two holes at either end can hold your dampers, gear differentials, etc. while you work on your model. • Length: 160mm, width: 100mm, height: approximately 42mm. • Can be used with a range of models from touring cars to longer-stroke rally models, and even buggies with less rebound stroke, such as TT-02B and comical buggy models.
Model-making tools
TRF Aluminium Parts Tray 110x140mm
300042292soon available again
Article number: 300042292 Product: TRF Aluminium Parts Tray 110x140mm Are you tired of small parts such as screws, spacers and so on rolling around your pit table and going missing? This aluminum tray eliminates such problems, keeping your table neat and tidy. Item Contents/Information • Aluminum Parts Tray x1 • Tray dimensions: 110mm x 140mm • This thin and lightweight product features deep indentations to ensure that parts do not fly out of the tray. • A handy scale is marked on the tray. Inserting your screw head in the indentation allows simple measurement of screw length. • Finished in a stylish blue and decorated with the TRF team logo.
Model-making tools
TRF RC Tool Bag
300042339soon available again
Article number: 300042339 Product: TRF RC Tool Bag Keep your tools together and easily accessible with this handy soft polyester bag. Item Contents/Information • R/C Tool Bag x1 • Made from black polyester, which will cushion your tools and doesn’t have the risk of cracking that hard cases do. • Features the Tamiya and TRF (Tamiya Racing Factory) logos printed on the top of the bag. • The perfect size for carrying TRF tools, long-nose pliers and so on. • With an internal divider, and touch fastener tape strap to keep your tools in place. • Approximate external dimensions: 310mm x 200mm x 60mm.
Model-making tools
TRF Storage Box (8-Comp) (3)
300042302soon available again
Article number: 300042302 Product: TRF Storage Box (8-Comp) (3) This storage set includes three sets of 8-Compartment Storage cases. They are housed in an outer case for a total of 24 independent storage sections to store small parts such as screws and nuts. The semi-transparent case allows you to easily identify the case contents. •8-Compartment Storage Case x3 •Outer Case x1 (Dimensions: 186x96x39mm) Warning! Not suitable for children under 14 years.
Model-making tools
TRF TC Carrying Case (Hard)
300042338soon available again
Article number: 300042338 Product: TRF TC Carrying Case (Hard) If you are just taking your touring car model out and don’t want to bring your entire tool kit with you, this carrying case is an ideal option. Item Contents/Information • Touring Car Carrying Case (Hard) x1 • Made from black plastic card for resistance to water, and even internal oil spills. • Features a convenient plastic handle. • Tamiya and TRF (Tamiya Racing Factory) logos are on the case top.
Polish, cleaners, aging materials
Weathering Set F Titan/Lt.G.Metal/Cooper
300087123soon available again
Article number: 300087123 Product: Weathering Set F Titan/Lt.G.Metal/Cooper This set of Tamiya Weathering Master pigments enables you to easily recreate the appearance of metal. The set features Titanium, Light Gun Metal, and Copper colors, which can be used to highlight panel lines on aircraft or distinguish different types of metal parts on motorcycles, among other applications. Applying the pigments on silver surfaces will increase the visual effect. The compact case conveniently includes a sponge applicator tool. Warning! Not suitable for children under 14 years.
