TAMIYA Product Range
Discover the fascinating world of TAMIYA model making! Here you will find everything your heart desires: from RC cars and model cars to an extensive range of modelling accessories. Immerse yourself in high-quality and detailed replicas: perfect for beginners and professionals alike!
Model aircraft kits 1:72
Kawanishi Shiden Type 11
300060768€14.79
Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72 Warning! Not suitable for children under 14 years.
Model-making tools
Mini Bending Pliers for PE
300074084€36.99
Article number: 300074084 Product: Mini Bending Pliers for PE These bending pliers are perfect for small photo-etched parts which have no identifiable bending lines. The flat tip of these pliers will give any modeler peace of mind as even if the PE parts are held firmly, they will not be scratched. When bending PE parts at right angles, sometimes the bent section will spring back, but these pliers make the bending of such angles easy without the need for special techniques. The pliers come with very comfortable grips. It is possible to bend straight lines up to 15mm at a time with this tool and it can also be used with other materials such as plastic. Mini Bending Pliers for PE Warning! Not suitable for children under 14 years.
Model-making tools
Modeler Knife pro Narrowchisel (5)
300074159€8.49
Article number: 30074159 Product: Modeler Knife pro Narrowchisel (5) • Narrow Chisel blades x5 • 0.55 mm thick. • Narrower than the already available chisel blade (Item 74101, Width: 4mm), and hence can be used in tighter spaces • Suitable for removing protrusion from flat surfaces of ribs and molds etc.
Model-making tools
Modeler Knife Pro Scraper (2) 0,5mm
300074161€8.49
Article number: 300074161 Product: Modeler Knife Pro Scraper (2) 0,5mm • Scraper blades x 2 • Features a design with a scraper shaped end. Great for altering surface textures or altering surface thickness gradually. • 0.5 mm thick. • Pull towards yourself to scrape away a section of the surface.
Model-making tools
Modeler Knife Pro Scriber (5) 0,4mm
300074160€8.49
Article number: 300074160 Product: Modeler Knife Pro Scriber (5) 0,4mm • Scriber blades x 5 • 0.4 mm thick. • Pull towards yourself to score the subject material. • Can be used to score then break off plastic plate to your desired size. • Thinner than Item 74091 Plastic Scriber II. • Suitable for very precise and detailed work.
Brushes & accessories
Modeling Brush Basic Set
300087066€6.69
Article number: 300087066 Product: Modeling Brush Basic Set This Basic Set is aimed at the beginner modeler. A perfect first-time modeling paintbrush set for those just starting out in the modeling world. The set features Tamiya Flat Brush No. 3, Flat Brush No. 1 and Pointed Brush (Small). Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush HF Standard Set
300087067€15.79
Article number: 300087067 Product: Modeling Brush HF Standard Set The HF Standard Set is for those who wish to gain a more beautiful and impressive finish on their model, whether they are beginners, intermediate or experts. Comes with High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush (Ultra Fine). Brushes employ special plastic hair suitable for model painting. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Flat Chisel Blade 2mm
300074143€22.49
Article number: 300074143 Product: Modeling Flat Chisel Blade 2mm • Material: High-Speed Steel • Length: 25mm, blade width: 2mm, diameter: 2mm. • A handy case is included for storage of the blade when not in use. • Thicker protrusions should be filed down first, and this blade used for their final removal. • Compatible with Item 74139 (recommended) and Item 74112 Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Round 1-12.5
300074150€9.59
Article number: 300074150 Product: Modeling Template Round 1-12.5 Tamiya's engraving blades are a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe curves and circles with ease thanks to this new set of photo-etched stainless steel template sheets! Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 3 sheets of circular templates ranging from 1mm to 12.5mm diameters, in 0.25mm intervals. • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm) Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template RR 1-6
300074154€9.99
Article number: 300074154 Product: Modeling Template RR 1-6 Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe rounded rectangles with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round templates in Item 74150. Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 3 sheets of rounded rectangle templates ranging from 1mm to 6mm in width, and 1.5mm to 12mm in length. The smallest measures 1mm x 1.5mm, and the largest 6mm x 12mm. • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm). Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Square 1-10
300074156€9.59
Article number: 300074156 Product: Modeling Template Square 1-10 Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use it to scribe squares with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round and rounded rectangle templates in Item 74150 and 74154 respectively. Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 4 sheets, each with square templates in 0.5mm length increments between 1mm and 10mm. Every sheet has a different corner style for its squares: right angle, R10%, R15% and R20%. The radius of rounded corners is calculated by multiplying square side length by R (10mm square x R10% = 1mm radius corners). • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)
Model aircraft kits 1:72
Mosquito B Mk.IV/PR Mk.IV
300060753€23.49
Article number: 300060753 Product: 1:72 Mosquito B Mk.IV/PR Mk.IV The versatile Mosquito stood with the Spitfire fighter and Lancaster bomber and earned the respect of British pilots during World War II. In 1939, the De Havilland company envisioned the plane to be an unarmed high speed bomber, and had experience with the Comet, which was a wooden racing plane. Except for the engine and landing gear, the Mosquito was comprised of wood, offering strategic advantages. The wooden construction wold save on important metals such as aluminum, it could also be built in converted furniture factories. The Air Ministry was reluctant to adopt the wooden aircraft, but placed orders for 50 planes in March 1940 for reconnaissance use. In November 1940, the Mosquito reached speeds of 630km/h during test flights, demonstrating its potential and quickly prompting additional orders of 150 planes. The Mosquito PR Mk. I reconnaissance plane was first deployed in July 1941; the B Mk. IV bomber started deployment in the Spring of 1942. On May 31, 1942, the Mosquitoes led a daylight raid on Cairn. In September 1942, the Gestapo headquarters in Oslo was bombed. German officials delivering a daytime speech in Berlin were attacked on January 30, 1943. These events demonstrated the Mosquito's ability to carry heavy loads and deliver low altitude surprise attacks with accuracy. The camera equipped PR Mk. IV reconnaissance plane discovered the German Battleship Tirpitz in the Artic Circle and scouted V2 rocket facilities. The Mosquitoes performced their duties with minimal losses, displaying their remarkable abilities. Detailed Plastic Kit of model Mosquito B Mk.IV/PR Mk.IV in scale 1:72 Warning! Not suitable for children under 14 years.
Model-making tools
Needle Nose W/Cutter II
300074146€39.99
Aticle number: 300074146 Product: Tamiya Spitzzange m. Cutter II These needle nose pliers are for use on R/C, static model products and more. Their long, slimline jaws provide superb grip. The pliers can be used as one would tweezers, and are also suitable for bending and cutting materials such as brass wire. • Jaws are chromium-vanadium steel. Their slimline form makes them ideal for work in confined spaces and with delicate components. • Handles have a comfortable and safe non-slip PVC grip. • Features the twin star logo on the hinge joint. • Edges inside the hinge can be used to cut mild steel wire up to 1.2mm diameter and brass wire up to 1.3mm.
Model-making tools
Paint Jar Stand
300074077€27.49
Article number: 300074077 Product: Paint Jar Stand Rotating two-tier paint jar stand lets you organize your paints clearly for easy access. It can store up to 7 jars of acrylic "mini" or 9 jars of enamel paints per tray. Each tray has a small groove along its edge, allowing you to also use this as a drying stand simply by using alligator clips (4 included) to hold newly painted parts. *PAINT NOT INCLUDED Paint Jar Stand Warning! Not suitable for children under 14 years.
Model-making tools
Paint Stirrer Metal (2)
300074017€6.39
Article number: 300074017 Product: Paint Stirrer Metal (2) This stainless steel tool is designed for stirring bottled paints, and for blending different color shades. One end is shaped like a small spoon, while the other is flat, like a spatula. Tool length is 15cm. Includes two stirrers. Warning! Not suitable for children under 14 years.
Model-making tools
Plastic & Soft Metal Scissors
300074124€29.99
Article number: 300074124 Product: Plastic & Soft Metal Scissors These versatile scissors are a must-have addition to every modeler's tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other materials/thicknesses above and beyond the capabilities of standard scissors. Length: 170mm; blade length: 40mm. Blade material: anti-rust treated stainless steel. Features a stylish navy blue grip. Suitable material thicknesses that may be cut: Note: materials and thicknesses are intended as a guideline only. Tamiya Pla-plate: up to 1.2mm Tamiya Clear Pla-plate: up to 0.5mm Polycarbonate: up to 1.0mm Other plastics: up to 1.0mm Aluminum: up to 0.5mm Copper/Brass/Nickel: up to 0.3mm Leather: up to 2.0mm Paper: up to 2.0mm Cardboard/Rubber sheeting: up to 5.0mm Warning! Not suitable for children under 14 years.
Model-making tools
Plastic Scriber II
300074091€11.79
Article number: 300074091 Product: Plastic Scriber II This tool is perfect for tasks such as scoring and cutting plastic sheets, creating mold lines on model parts, and modifying Mini 4WD machines. The blade can be retracted after use and two spare blades are also stored inside the handle. Warning! Not suitable for children under 14 years.
Model-making tools
Quick Hose Joint
300074561€26.49
Article number: 300074561 Product: Quick Hose Joint Repeatedly hooking up your airbrushes to the hose and air supply can be something of a pain when you need more than one airbrush for a job. Say goodbye to those worries, with the Quick Hose Joint, which allows you to connect airbrush and hose with a single touch – simply slot in to connect and slide the center section to detach! Item Contents/Information • Quick Hose Joint x1 • Plugs x2 • Joint size: Type-S (PF-1/8) • Compatible with all Tamiya Spray-Work series airbrushes. Spray-Work Basic Airbrush requires separately sold Connector Joint (Item 74536). • Not compatible with Tamiya Badger airbrushes, air cans or Basic Compressor. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:72
SEIRAN
300060737€13.99
Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72 Warning! Not suitable for children under 14 years.
Model-making tools
Side Cutter for Plastic
300074001€37.99
Article number: 300074001 Product: Side Cutter for Plastic This is a precision side cutter for removing parts from sprue without damaging them. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip. Side Cutter for Plastic Warning! Not suitable for children under 14 years.
Model aircraft kits 1:72
Skyray
300060741€14.49
Article number: 300060741 Product: 1/72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailed Plastic Kit of model Skyray in scale 1:72 Warning! Not suitable for children under 14 years.
Model-making tools
SP Side Cutter (Slim Jaw)
300074123€47.99
Article number: 300074123 Product: SP Side Cutter (Slim Jaw) This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance. •Length: 115mm. •Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge. •PVC grip covers ensure that the side cutters stay firmly in your hand during use. •The tool is marked with the twin star logo and TAMIYA CRAFT TOOLS FOR PLASTIC Warning! Not suitable for children under 14 years.
Model-making tools
SW Quick Hose Joint Plugs (2)
300074562€11.99
Article number: 300074562 Product: SW Quick Hose Joint Plugs (2) These are replacement plug sections for the Quick Hose Joint, which allows you to (dis)connect airbrush and hose with a single touch – simply by sliding its center section! Item Contents/Information • Quick Hose Joint Plugs x2 • Compatible with Item 74561
Model motorcycle kits 1:12
Szuzuki GSX1100S Katana
300014010€24.99
Article number: 300014010 Product: 1:12 Suzuki GSX1100S Katana Making its exciting debut in 1980 at the IFMA trade show in Cologne, Germany and later released to the public in 1981 was the Suzuki GSX1100S Katana. The aggressive form of the Katana designed by Hans Muth is reproduced by this plastic model assembly model kit. The mechanical mood of the 4-cylinder DOHC engine, along with ignition cords, brake pipes, and instrument cables which are reproduced with vinyl tubing, has been precisely captured. In addition, metal screws are included to provided extra strength to parts such as the wheel axles. Solid synthetic rubber tires front and rear have tread patterns, and are mounted onto accurately reproduced renderings of Suzuki's famed star-shaped die-cast wheels to provide the model with a highly realistic presence.
Model-making tools
TAMIYA Basic File Set (3)
300074046€10.79
Article number: 300074046 Product: TAMIYA Basic File Set (3) This set contains three types of files; flat, round and half-round, specially developed for modeling use. Files are suitable for working plastic and soft metals. Each file features a compact size of approximately 16cm in length. Basic File Medium Double-Cut Warning! Not suitable for children under 14 years.
Model-making adhesive
Tamiya Cement w/Brush 20ml
300087012€3.791 l = €189.50
Article number: 300087012 Product: Tamiya Cement w/Brush 20ml This is liquid type glue. It will work for strengthening the Dangun Racer's body. In the assembly of the body, apply this glue on parts to be fitted together, then fasten the parts with screws. This secure construction brings you a sturdy body ready to battle.
Other accessories
Tamiya Cotton Swab round extra small(50)
300087103€5.69
Article number: 300087103 Product: Tamiya Cotton Swab round extra small(50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Warning! Not suitable for children under 14 years.
Other accessories
Tamiya Cotton Swab round small(50)
300087104€5.69
Article number: 300087104 Product: Tamiya Cotton Swab round small(50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Warning! Not suitable for children under 14 years.
Other accessories
Tamiya Cotton Swab Swab round (50)
300087141€6.59
Article number: 300087141 Product: Tamiya Cotton Swab Swab round (50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. • These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. • These swabs are great for applying decals and panel lining onto model surfaces. • Creating fine details and weathering on small areas becomes a breeze. • You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Warning! Not suitable for children under 14 years.
Other accessories
Tamiya Cotton Swab Swab triang. (50)
300087142€6.59
Article number: 300087142 Product: Tamiya Cotton Swab Swab triang. (50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. • These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. • These swabs are great for applying decals and panel lining onto model surfaces. • Creating fine details and weathering on small areas becomes a breeze. • You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Warning! Not suitable for children under 14 years.
Other accessories
Tamiya Cotton Swab Tria.extra small(50)
300087105€6.69
Article number: 300087105 Product: Tamiya Cotton Swab Tria.extra small(50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Warning! Not suitable for children under 14 years.
